CHEF
Mid-Carder
Joined on: Jul 8, 2009 13:03:59 GMT -5
Posts: 282
|
Post by CHEF on Dec 28, 2010 14:03:34 GMT -5
does anyone know what paints to use to make sheamus' skintone working on a ra custom of him but im clueless as to paints to use for his skin
|
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Dec 28, 2010 14:42:33 GMT -5
does anyone know what paints to use to make sheamus' skintone working on a ra custom of him but im clueless as to paints to use for his skin the delta creamcoat skin tone is pretty pale, folk art skin color if you add a lot of white to whiten it up would work good as well because itd also be kinda chalky like shamus lmao |
|
|
|
Post by "The Gothic Superstar" Ronin on Dec 28, 2010 15:18:55 GMT -5
I would think that just white would work since Seamus has NO pigmentation at all, until he gets chopped lol
|
|
christianedge
Main Eventer
Joined on: Dec 22, 2009 21:47:07 GMT -5
Posts: 1,743
|
Post by christianedge on Jan 2, 2011 4:42:57 GMT -5
does anyone know what paints to use to make sheamus' skintone working on a ra custom of him but im clueless as to paints to use for his skin Get some white, add some red to make a VERY light pink. Add some yellow. If that comes out too light, then add blue. VERY LITTLE blue at a time. |
|
mase307
Main Eventer
Elite Trader
instagram.com/mase307 Getting Rid of Figs! Send a PM if interested
Joined on: Sept 22, 2010 7:46:37 GMT -5
Posts: 2,836
|
Post by mase307 on Jan 29, 2011 8:35:12 GMT -5
Sorry if it was asked before, but I needed to paint a face the skin tone color of a mattel jim duggan or million dollar man. Anyone have any suggestions with which color would closely match that body skin tone.
|
|
|
|
Post by wyleecyotee on Feb 22, 2011 12:59:07 GMT -5
Can I get some help on:
A) Best Primer.
2) Best type of paint.
D) Best sealer.
4) Best brushs
5) How to hollow out a head.
If you could PM me with links to website or eBbb.ay for UK it would be greatly appreciated.
Thank.
|
|
Mr. Mojo Risin
Superstar
When It Comes To Be,That Is'nt The Light At The End Of The Tunnel,It's A Freight Train Comin For You
Joined on: Jan 9, 2011 18:51:14 GMT -5
Posts: 663
|
Post by Mr. Mojo Risin on Mar 7, 2011 12:26:43 GMT -5
what kind of paint should used on ljns??? cant find it anywhere in here thanx in advance
|
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Mar 30, 2011 13:57:41 GMT -5
Can someone help with ways to remove an existing logo without damaging the fig as well as adding new logo,designs, tattoos on figures that look good an not so sloppy?
|
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Mar 30, 2011 14:55:18 GMT -5
what kind of paint should used on ljns??? cant find it anywhere in here thanx in advance I would think that with LJNs, you'd want a paint with latex in it...something along the lines of Liquitex. That way, the paint won't chip, and is bendable. |
|
|
|
Post by "Living Legend" Duttanized on Jun 21, 2011 18:47:24 GMT -5
Which paint is good for painting titles?
|
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Jun 23, 2011 21:37:38 GMT -5
Which paint is good for painting titles? Like Mattel's or Jakk's titles? Acrylics should be fine. If you want a gloss to it, don't finish it with a matte finish. Finish it with a gloss coat. |
|
|
|
Post by "Living Legend" Duttanized on Jun 25, 2011 23:11:59 GMT -5
Which paint is good for painting titles? Like Mattel's or Jakk's titles? Acrylics should be fine. If you want a gloss to it, don't finish it with a matte finish. Finish it with a gloss coat. I was wondering about the actual paint colour like the gold or whatever. |
|
|
|
Post by Lewscher on Jun 29, 2011 5:41:37 GMT -5
Can i use warhammer / citedal black spray on the CS brutas mask? its made of flexible rubber so i dont know if it will crack or anything. please reply and pm me as im bound to forget where this thread is  |
|
TheXtremisT
Main Eventer
10 Year Member
This is the way
Joined on: May 3, 2008 8:03:15 GMT -5
Posts: 3,951
|
Post by TheXtremisT on Jun 29, 2011 5:57:23 GMT -5
Can i use warhammer / citedal black spray on the CS brutas mask? its made of flexible rubber so i dont know if it will crack or anything. please reply and pm me as im bound to forget where this thread is Absolutely fine. Citadel paints are the ones I use and I have no problems with them Black spray is the best because it has an even coat and can't be rubbed off. Just remember to get no closer than 20cm and spray in very short bursts every 30 seconds |
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Jul 3, 2011 23:22:43 GMT -5
Can i use warhammer / citedal black spray on the CS brutas mask? its made of flexible rubber so i dont know if it will crack or anything. please reply and pm me as im bound to forget where this thread is Absolutely fine. Citadel paints are the ones I use and I have no problems with them Black spray is the best because it has an even coat and can't be rubbed off. Just remember to get no closer than 20cm and spray in very short bursts every 30 seconds If the paint isn't pliable (see my Liquitex post above), it will eventually crack. |
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Jul 5, 2011 17:17:24 GMT -5
Ok guys.
Here is a hefty question. I'm currently using Tamiya paint and Citadel paint. I need help recreting a tan skin tone.
+1 for the correct help.
|
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Jul 23, 2011 0:49:14 GMT -5
What paint could i use to make the new unpainted mattel basic belts shine like the painted ones that came with the elites? Also, how could i make the boots shine on my figures like the new elite 10 kane?
|
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Jul 23, 2011 18:50:29 GMT -5
Hi everyone. I'm new here. I plan on working on some old TTL figures and was wondering if I should use a gloss, semi-gloss, or flat paint? They are a little shiny but i'm not sure if a gloss paint was used when they were made or not. Thanks for any help, it's greatly appreciated.
|
|
Deleted
Joined on: Nov 21, 2024 6:34:16 GMT -5
Posts: 0
|
Post by Deleted on Jul 25, 2011 19:17:53 GMT -5
Hi everyone. I'm new here. I plan on working on some old TTL figures and was wondering if I should use a gloss, semi-gloss, or flat paint? They are a little shiny but i'm not sure if a gloss paint was used when they were made or not. Thanks for any help, it's greatly appreciated. As long as the paint is acrylic, either would work. For instance, you could use flat for trunks/tights, and use gloss for boots (think exclusive Kane). It just usually depends on preference. You could use a gloss paint, and then use a matte finish on it to dull it. |
|
sharkmark21
Jobber
Joined on: Oct 27, 2008 21:33:03 GMT -5
Posts: 45
|
Post by sharkmark21 on Aug 16, 2011 1:09:25 GMT -5
Hi everyone,
I want to paint the hair of Ricky and Robert The R & R express figs, like Jakks should have painted them in the first place. Has anyone here painted their R & R figs and could suggest the right color for each. I know I should use acrylic paint but should I use a sealer too? Thanks in advance.
|
|
