|
|
Post by neptuneandtheblues on Apr 5, 2024 19:48:16 GMT -5
My apologies if this has been addressed before, but is one able to switch upper/lower legs with pinless joints? I would like to swap out calfs on a figure but didn't know if it is possible with pinless joints. Thanks in advance.
|
|
czw4life
Main Eventer
Refs: 24
Joined on: Jan 3, 2014 19:13:51 GMT -5
Posts: 1,848
|
Post by czw4life on Apr 7, 2024 21:21:31 GMT -5
I also am curious how people are switching parts now with pinless joints
|
|
|
|
Post by HandsomeHollywood on Apr 18, 2024 12:05:47 GMT -5
I haven't attempted it yet but I feel like you should be able to slide a knife into the joint and sever the pin. Just a theory though.
|
|
dizneyfist
Superstar
Joined on: Jul 27, 2006 22:34:48 GMT -5
Posts: 742
|
Post by dizneyfist on Aug 27, 2024 18:31:24 GMT -5
So just in case you're a big fan of pinless joints they are a customizer's nightmare. Basically its molded through the hole so the only way to remove it is to use an exacto knife and cut one side of each joint. Only issue is once you do this the joint is no longer secure. If you pull it there's a good chance it will come apart.
|
|
|
|
Post by Turnbuckle Zealot(Phil) on Sept 9, 2024 1:38:38 GMT -5
I also am curious how people are switching parts now with pinless joints The only way I’ve been able to customize them is to just switch out the whole arm, which is surprisingly hard because the pegs coming out the shoulder on the pre double joint arm elites and the DJA elites don’t line up perfectly. |
|
