shotgun2122
Jobber
Joined on: Nov 8, 2023 15:09:09 GMT -5
Posts: 9
|
Post by shotgun2122 on Mar 23, 2024 12:33:52 GMT -5
do you guys ever have problems with a figures parts being loose almost straight out of the package? had an elite daniel bryan and his head popped off pretty easily, bought brand new but not sure if theres an easy fix to it, thanks!
|
|
|
Post by rkmo: Autonomous Meat Shield on Mar 23, 2024 13:10:08 GMT -5
One or two figures I've gotten with the knee joint poorly fastened, basically falling off. It's a heat and treat job but I've not the energy for it.
Soooo many locked up left shoulder joints recently! Doudrop I bought during Black Friday is done for.
|
|
|
Post by PJ on Mar 23, 2024 15:46:12 GMT -5
I haven’t had a figure break since the first DM Macho Man I purchased had a fused hip because of excessive glue got into the hip joint. Took it back to Target for a replacement.
|
|
|
Post by ImJoeGrizzlyBitch on Mar 23, 2024 15:51:04 GMT -5
I’ve got around 500 figures and fortune enough to say I’ve never had one to break on me.
|
|
controlchaos
Mid-Carder
Joined on: Jul 14, 2013 11:51:06 GMT -5
Posts: 161
|
Post by controlchaos on Mar 23, 2024 16:19:44 GMT -5
With some of the older figures I would have some figures that would have something loose in their ab crunch , so everytime I would move or shake the figure you could hear the piece moving around on the inside. Now the new figures , I’ve had the issue where some of the heads pop off of the body really easily. Happened recently with an elite John Cena and the ultimate Roman reigns .
|
|
nomorexclusives
Main Eventer
Joined on: Jul 31, 2023 16:49:31 GMT -5
Posts: 1,079
Member is Online
|
Post by nomorexclusives on Mar 23, 2024 16:25:36 GMT -5
Yes a few superstars figure. I had one break at the knee joint. Also had a u.warrior elite break at the armpit. Love the mattel line but jakks figures were much more durable and better made.
|
|
|
Post by kgchampion on Mar 23, 2024 20:55:27 GMT -5
One or two figures I've gotten with the knee joint poorly fastened, basically falling off. It's a heat and treat job but I've not the energy for it. Soooo many locked up left shoulder joints recently! Doudrop I bought during Black Friday is done for. I swear around 2014 most of the elites with the smaller torso (think Jericho, HBK, Punk, etc.) and smallervarms had an issue where you can’t rotate the left shoulder in a full circle without it cracking something inside. It still persists to this day. I’ve got probably 100 figures with the small body-small arm combo where you can rotate the right shoulder 360 degrees until the cows come home, but the left shoulder can only move from ski jump pose to historical German salute and anything beyond that range is not possible. I can raise my left arm higher.
|
|
DaFlo
Mid-Carder
WF 10 Year Member
Germany
Joined on: Jun 13, 2011 9:16:30 GMT -5
Posts: 383
|
Post by DaFlo on Mar 23, 2024 21:32:13 GMT -5
With some of the older figures I would have some figures that would have something loose in their ab crunch , so everytime I would move or shake the figure you could hear the piece moving around on the inside. Now the new figures , I’ve had the issue where some of the heads pop off of the body really easily. Happened recently with an elite John Cena and the ultimate Roman reigns . I can tell you I had that problem with almost all of my Cena Elites. Elite 20 and BAF John Laurinaitis both have very loose heads. On top of that all of those Cenas can't stand. Really annoying. I saw someone posting here that qtip wool could work if to stuff the space.
|
|
|
Post by gentlemanjohnny on Mar 23, 2024 22:50:03 GMT -5
The heads are way too loose on a few of mine. I bought a Hogan yesterday from the Luger build a fig and the Hulksters head just falls right off. I had the same thing happen with a few others too. My 123 kid from the 3 pack is one that comes to mind. The head doesn’t stay on. Anyone else noticed this happening?
|
|
|
Post by shanieomaniac on Mar 24, 2024 2:22:54 GMT -5
I've had some of my recent KO figures that are essentially bobbleheads. The heads don't usually fall off but there is no tension in the neck joint at all. his head just sort of falls forward and stays there.
I think the one I gave up and shoved sticky tack down the peg hole to try and fix it.
|
|
thep1
Main Eventer
Joined on: Jul 11, 2022 14:53:27 GMT -5
Posts: 1,357
|
Post by thep1 on Mar 24, 2024 8:16:31 GMT -5
I am shocked that none of y'all have mentioned Punk!
|
|
|
Post by rkmo: Autonomous Meat Shield on Mar 24, 2024 9:55:34 GMT -5
I am shocked that none of y'all have mentioned Punk! Cuz nobody here is a a-hole?
|
|
zachg
Mid-Carder
Joined on: Jun 15, 2020 10:28:41 GMT -5
Posts: 119
|
Post by zachg on Mar 24, 2024 10:26:36 GMT -5
I’ve had two and both legs fell off. UE hogan and that Amazon Andre
|
|
oldschoolfool
Main Eventer
Joined on: Mar 4, 2021 17:37:06 GMT -5
Posts: 1,299
|
Post by oldschoolfool on Mar 24, 2024 11:42:16 GMT -5
Only instance for me with a Mattel WWE fig was legends Vader had a loose torso. That's it.
Instances of figures literally breaking as I'm taking them out of the package go to DC Direct (multiple times lol) and Sota.
And I've had severe looseness on Super 7 Ultimates. As well as the ultrasonic welding not really binding the torso halves together. So the torsos start to split as soon as you move the arms. They never break outright but, it leaves a noticeable gap.
|
|
thep1
Main Eventer
Joined on: Jul 11, 2022 14:53:27 GMT -5
Posts: 1,357
|
Post by thep1 on Mar 24, 2024 12:48:52 GMT -5
I am shocked that none of y'all have mentioned Punk! Cuz nobody here is a a-hole? Relax dude, all in good fun. Figures aren't that serious.
|
|
hordakgrim
Mid-Carder
Joined on: Aug 13, 2023 16:29:21 GMT -5
Posts: 165
|
Post by hordakgrim on Mar 24, 2024 16:00:27 GMT -5
I've had some of my recent KO figures that are essentially bobbleheads. The heads don't usually fall off but there is no tension in the neck joint at all. his head just sort of falls forward and stays there. I think the one I gave up and shoved sticky tack down the peg hole to try and fix it. My SS KO has a loose head too.
|
|
hordakgrim
Mid-Carder
Joined on: Aug 13, 2023 16:29:21 GMT -5
Posts: 165
|
Post by hordakgrim on Mar 24, 2024 16:02:09 GMT -5
I got a E105 Roxanne Perez that had the torso and abdomen backwards. Her belly button and ribs were on her back.
|
|
|
Post by jumpinjefffarmer on Mar 24, 2024 17:04:16 GMT -5
I got a E105 Roxanne Perez that had the torso and abdomen backwards. Her belly button and ribs were on her back. She sounds...flexible. giggidy
|
|
|
Post by kgchampion on Mar 24, 2024 17:05:57 GMT -5
I've had some of my recent KO figures that are essentially bobbleheads. The heads don't usually fall off but there is no tension in the neck joint at all. his head just sort of falls forward and stays there. I think the one I gave up and shoved sticky tack down the peg hole to try and fix it. My Ultimate NWO Macho is like that. I wrapped one of those tiny clear rubber bands that come with some figures around his neck peg to create a stopper between the peg shaft and the torso’s neck hole. It’s still a little floppy, but nowhere near as bad.
|
|
|
Post by Crossfit Jesus on Mar 24, 2024 17:12:57 GMT -5
It’s gonna be funny if when the new punks come out and one of their arms breaks from being too tight
|
|