Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 842
|
Post by Robz PippinRoad on Jun 30, 2021 16:45:09 GMT -5
Damn my Hangman series 5 is Loose! Mine is everywhere and I honestly have no clue what to do about it Allot of what’s causing looseness in series 5 Hangman Luchasaurus Scorpio is the ball joint area whether they made it too wide or the plastic is too smooth I’m not sure but just twist pop the legs off at the ball joint area they come right off like everything else no hot water even needed on Hangman in particular then use which ever method you prefer Modge Podge , Floor Cleaner , clear nail polish but once you have decided put some of that on the ball joints put legs back on let it dry real good ‘and problem solved as far as that raggedy Ann like doll shake they currently do |
|
EMW Figure Shelf
Main Eventer
HAHAHAHA no.
Joined on: Feb 2, 2010 18:38:54 GMT -5
Posts: 1,633
|
Post by EMW Figure Shelf on Jun 30, 2021 16:58:13 GMT -5
Scaling
Looseness in Joints
Some figures are too easy to pop joints off. (Luchasaurus' torso is easily removable when trying to pose him in a seated position for Photography.)
Faded tattoos (I worry about the faded look some tattoos have like for Fenix in series 2 overtime. I fear the tattoos will fade off for some reason.)
Other than that, I have been loving the figures. Just want to see some improvements much like how Mattel has drastically improved over time.
|
|
|
|
Post by Yambag Jones on Jul 1, 2021 10:50:42 GMT -5
My only complaint is scale
|
|
|
|
Post by newgenandy on Jul 4, 2021 13:31:36 GMT -5
Mine is everywhere and I honestly have no clue what to do about it Allot of what’s causing looseness in series 5 Hangman Luchasaurus Scorpio is the ball joint area whether they made it too wide or the plastic is too smooth I’m not sure but just twist pop the legs off at the ball joint area they come right off like everything else no hot water even needed on Hangman in particular then use which ever method you prefer Modge Podge , Floor Cleaner , clear nail polish but once you have decided put some of that on the ball joints put legs back on let it dry real good ‘and problem solved as far as that raggedy Ann like doll shake they currently do In 2021 we shouldn’t have to mess around with nail varnish etc to try and get figures an acceptable standard. They should be made better |
|
TeamFnKick
Superstar
Joined on: Jul 17, 2013 19:53:38 GMT -5
Posts: 977 
|
Post by TeamFnKick on Jul 5, 2021 8:12:55 GMT -5
Mine is everywhere and I honestly have no clue what to do about it Allot of what’s causing looseness in series 5 Hangman Luchasaurus Scorpio is the ball joint area whether they made it too wide or the plastic is too smooth I’m not sure but just twist pop the legs off at the ball joint area they come right off like everything else no hot water even needed on Hangman in particular then use which ever method you prefer Modge Podge , Floor Cleaner , clear nail polish but once you have decided put some of that on the ball joints put legs back on let it dry real good ‘and problem solved as far as that raggedy Ann like doll shake they currently do Finally got around to doing this… wow night and day difference thanks |
|
|
|
Post by Bandalero on Jul 5, 2021 10:44:38 GMT -5
what's really ticking me off is the unannounced variants being released so close together - like Jurassic Express 2-pack close to their single releases and now the leaked SCU 2-pack close to their single releases (in better gear!). If this is how Jeremy plans to flood his lines then why bother pre-order?
I'm not against repaints, it's going to happen, and I love me more Codys! But why release them so close together? SCU and Jurassic Express are supporting acts, I love the Lucha Bros, but we just got them in series 2 and now they're in series 6. I liked my Proud & Powerful series 4, but I REALLY wanted them in their orange/camo gear and sure enough they're coming out in series 7....
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 842
|
Post by Robz PippinRoad on Jul 5, 2021 22:07:33 GMT -5
Allot of what’s causing looseness in series 5 Hangman Luchasaurus Scorpio is the ball joint area whether they made it too wide or the plastic is too smooth I’m not sure but just twist pop the legs off at the ball joint area they come right off like everything else no hot water even needed on Hangman in particular then use which ever method you prefer Modge Podge , Floor Cleaner , clear nail polish but once you have decided put some of that on the ball joints put legs back on let it dry real good ‘and problem solved as far as that raggedy Ann like doll shake they currently do In 2021 we shouldn’t have to mess around with nail varnish etc to try and get figures an acceptable standard. They should be made better Obviously but it is what it is until they get it right |
|
BaLoR RoLLiNS
Main Eventer
Joined on: May 18, 2006 1:05:47 GMT -5
Posts: 1,577
|
Post by BaLoR RoLLiNS on Jul 11, 2021 16:03:33 GMT -5
Series 3 at Target. Orange was the only missing one when I walked up.
I damn near fell on the floor when I saw them.
I bought the Bucks
|
|
