Roadie Codes
Superstar
Joined on: Nov 9, 2011 15:59:47 GMT -5
Posts: 678
|
Post by Roadie Codes on Nov 25, 2020 20:40:44 GMT -5
My Kenny Omega figure was falling over quite often. His ankle joints were so loose. Such a small flaw on such a great figure. But even a small flaw can weigh heavy on the mind of a loose collector.
Then one day I realized that the rubber bands that I use for my Invisalign (braces) could maybe work. They were the perfect solution. They aren’t noticeable at all, I didn’t have to permanently alter the figure in anyway, and now he stands up on his own and can have fig matches without his toes pointing all over the place.
If anybody needs a couple of these it only takes 1 per ankle. Hit me up and I’ll send you some. I get them for free from my dentist.
|
|
|
Post by PJ on Nov 27, 2020 5:35:42 GMT -5
I been using use those for a few years now on Mattel’s with the left loose shoulders. My Omega doesn’t have lose ankles just one leg noticeably longer than the other. I wish it was a loose ankles issue over this.
|
|
The Elitist
Superstar
Proudest Member of the Fightin' Texas A&M Aggie Class of 2006! WHOOP!
Joined on: May 23, 2008 19:59:35 GMT -5
Posts: 915
|
Post by The Elitist on Nov 27, 2020 10:40:10 GMT -5
I been using use those for a few years now on Mattel’s with the left loose shoulders. My Omega doesn’t have lose ankles just one leg noticeably longer than the other. I wish it was a loose ankles issue over this. Do you think this small rubber band problem will fix a loose leg? I have another fig who has a loose right leg, at the hip. Was thinking if this might work to fix it up and just make it a bit more sturdy.
|
|
lax325
Jobber
Joined on: Jan 17, 2015 19:35:03 GMT -5
Posts: 10
|
Post by lax325 on Nov 30, 2020 16:47:20 GMT -5
I been using use those for a few years now on Mattel’s with the left loose shoulders. My Omega doesn’t have lose ankles just one leg noticeably longer than the other. I wish it was a loose ankles issue over this. Do you think this small rubber band problem will fix a loose leg? I have another fig who has a loose right leg, at the hip. Was thinking if this might work to fix it up and just make it a bit more sturdy. I’d like to know about a leg fix too. My Moxley has a super loose right leg
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 30, 2020 21:53:00 GMT -5
Do you think this small rubber band problem will fix a loose leg? I have another fig who has a loose right leg, at the hip. Was thinking if this might work to fix it up and just make it a bit more sturdy. I’d like to know about a leg fix too. My Moxley has a super loose right leg Reach out to customer service they may be able to help you with the Mox considering it hasn’t been that long since you got it
|
|
|
Post by Xæro #FakeCollector on Dec 1, 2020 14:26:51 GMT -5
Do you think this small rubber band problem will fix a loose leg? I have another fig who has a loose right leg, at the hip. Was thinking if this might work to fix it up and just make it a bit more sturdy. I’d like to know about a leg fix too. My Moxley has a super loose right leg Heat the leg at the hip joint, pop it off and wrap some tape around the peg. Heat the leg up again and pop it back on.
|
|
The Elitist
Superstar
Proudest Member of the Fightin' Texas A&M Aggie Class of 2006! WHOOP!
Joined on: May 23, 2008 19:59:35 GMT -5
Posts: 915
|
Post by The Elitist on Dec 1, 2020 14:39:36 GMT -5
I’d like to know about a leg fix too. My Moxley has a super loose right leg Heat the leg at the hip joint, pop it off and wrap some tape around the peg. Heat the leg up again and pop it back on. Thanks
|
|
|
Post by charabro on Dec 1, 2020 14:59:48 GMT -5
I been using use those for a few years now on Mattel’s with the left loose shoulders. My Omega doesn’t have lose ankles just one leg noticeably longer than the other. I wish it was a loose ankles issue over this. Rough that mate
|
|
thekev12
Mid-Carder
Joined on: Jul 26, 2020 10:04:19 GMT -5
Posts: 296
|
Post by thekev12 on Dec 2, 2020 11:42:13 GMT -5
Good call. I just immediately stole two from my son. 😂
|
|
The Elitist
Superstar
Proudest Member of the Fightin' Texas A&M Aggie Class of 2006! WHOOP!
Joined on: May 23, 2008 19:59:35 GMT -5
Posts: 915
|
Post by The Elitist on Dec 2, 2020 18:49:19 GMT -5
I’d like to know about a leg fix too. My Moxley has a super loose right leg Heat the leg at the hip joint, pop it off and wrap some tape around the peg. Heat the leg up again and pop it back on. Like clear tape? And how much?
|
|
|
Post by Xæro #FakeCollector on Dec 6, 2020 23:00:01 GMT -5
Heat the leg at the hip joint, pop it off and wrap some tape around the peg. Heat the leg up again and pop it back on. Like clear tape? And how much? I usually use clear tape but any tape should do. I cut a small rectangular piece and then wrap around the peg. If it's still not as tight as I'd like, I'll remove it and wrap a bigger piece.
|
|
The Elitist
Superstar
Proudest Member of the Fightin' Texas A&M Aggie Class of 2006! WHOOP!
Joined on: May 23, 2008 19:59:35 GMT -5
Posts: 915
|
Post by The Elitist on Dec 7, 2020 7:10:46 GMT -5
Like clear tape? And how much? I usually use clear tape but any tape should do. I cut a small rectangular piece and then wrap around the peg. If it's still not as tight as I'd like, I'll remove it and wrap a bigger peace. Yes thank you, I tried it this weekend and it worked. No more loose leg. Thanks again!
|
|
|
Post by WCWThunderRosa on Feb 16, 2021 21:03:58 GMT -5
So you just put the band around his ankle pivot? Or do you have to remove the foot and then put it back on?
|
|
dizneyfist
Superstar
Joined on: Jul 27, 2006 22:34:48 GMT -5
Posts: 742
|
Post by dizneyfist on Feb 17, 2021 16:33:58 GMT -5
Like clear tape? And how much? I usually use clear tape but any tape should do. I cut a small rectangular piece and then wrap around the peg. If it's still not as tight as I'd like, I'll remove it and wrap a bigger piece. You could also use glue and just keep turning it until the glue dries and that will tighten the joint.
|
|
|
Post by WCWThunderRosa on Feb 17, 2021 17:00:25 GMT -5
Just did this to the green Omega and it’s so much better now. I also put them on Moxley. I have a bunch leftover from my separator so I’m good to go.
|
|
|
Post by LA Knight Yeah! on Feb 17, 2021 17:22:06 GMT -5
Hopefully series 4 omega doesn’t have any loose ankles
|
|
|
Post by wrestlingdelorean on Feb 20, 2021 18:52:56 GMT -5
Hopefully series 4 omega doesn’t have any loose ankles mine doesn't. 100% improvement.
|
|
|
Post by LA Knight Yeah! on Feb 20, 2021 20:48:27 GMT -5
Hopefully series 4 omega doesn’t have any loose ankles mine doesn't. 100% improvement. that’s great news I was worried about that cause series 1 did it was annoying but series 4 is such a sick figure
|
|
|
Post by wrestlingdelorean on Feb 21, 2021 16:39:03 GMT -5
My Kenny Omega figure was falling over quite often. His ankle joints were so loose. Such a small flaw on such a great figure. But even a small flaw can weigh heavy on the mind of a loose collector. Then one day I realized that the rubber bands that I use for my Invisalign (braces) could maybe work. They were the perfect solution. They aren’t noticeable at all, I didn’t have to permanently alter the figure in anyway, and now he stands up on his own and can have fig matches without his toes pointing all over the place. If anybody needs a couple of these it only takes 1 per ankle. Hit me up and I’ll send you some. I get them for free from my dentist. I'm sorry i didn't see this sooner. This is a great tip. Fixed my Omega 1 and RSC exclusive today. Thank you!
|
|
kwagmyr
Mid-Carder
Joined on: Jan 26, 2021 14:28:37 GMT -5
Posts: 213
|
Post by kwagmyr on Feb 21, 2021 19:48:16 GMT -5
I think I'll use this to get the AEW figs to sit on the WWE RSC bases better. They barely help ATM.
|
|