Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 12, 2020 11:57:44 GMT -5
I meant more I wanted to compare Dustin versus Goldust elites and/or Moxley versus Ambrose elites if anyone can compare? If it helps Ambrose elite scales smaller than the UE Cena he showed in the pics which wouldn’t be accurate in real life anyways don’t have a golddust but judging by comparison pics I can find of collections Golddust scales w EG jeff Hardy which puts him about even w Ambrose elite which is a little too short however Cody scales well to Golddust in elites but Again not as tall as he should be either if anyone has pics of Golddust or Cody elites we can probably verify this more accurately
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 12, 2020 11:58:56 GMT -5
Please show me the Jakks Rey that's the same size as Big Show. to be fair, I think I over sold that a little bit, but some of his figures were huge: forum.wrestlingfigs.com/post/6406840check this post, it shows him being almost as tall as Undertaker! It’s wrestling your allowed to oversell at times ...lol .. unless really in hand it can be tricky
|
|
Deleted
Joined on: Sept 28, 2024 6:22:54 GMT -5
Posts: 0
|
Post by Deleted on Nov 12, 2020 12:03:53 GMT -5
There is a Jakks Rey that's huge. My boys have one and he's bigger than most elite figs. No clue where he is in their toy room. I've never seen an RA Rey that qas nearly as tall as RA Big Show. The parts they used on Rey were done so he'd be shorter than most of the figures. Everyone talks about how they made him the same size as Taker and Show but nobody ever has the pics because they never made an RA of him with parts that would have made him that big. DA line? Maybe but still not likely. forum.wrestlingfigs.com/post/6406840 check this post, it shows him being almost as tall as Undertaker + batista! His initial figures were smaller, then they started making him like 6+ ft tall for some reason. It sort of came around a little bit towards the end, but most of his jakks figures were like a figure-height inch shorter than Taker + Batista. [the big show thing was a bad example, and me over doing it] [sorry for potential double post, replying to the above just in case you missed it]
|
|
sbayunco
Mid-Carder
Joined on: Jul 18, 2020 9:48:00 GMT -5
Posts: 325
|
Post by sbayunco on Nov 12, 2020 12:24:23 GMT -5
Awesome thx u ... if you have one more in you Just Ambrose Cody Dustin together if not you’ve done more than enough thx u allot imgur.com/a/ZhFQxNe
|
|
Deleted
Joined on: Sept 28, 2024 6:22:54 GMT -5
Posts: 0
|
Post by Deleted on Nov 12, 2020 12:25:33 GMT -5
Awesome thx u ... if you have one more in you Just Ambrose Cody Dustin together if not you’ve done more than enough thx u allot imgur.com/a/ZhFQxNeJesus, Dustin looks huge next to the Elite Goldust.
|
|
Deleted
Joined on: Sept 28, 2024 6:22:54 GMT -5
Posts: 0
|
Post by Deleted on Nov 12, 2020 12:32:50 GMT -5
After looking at all the photos, Dustin's width seems to be more out-of-scale than his height. That said, Moxley jumps out as a bigger case of scaling issues. MJF looks too big, as well.
I didn't collect during the Jakks days, so, I'll ask those who were. Is Jeremy/WCT likely to make the Series 1 figures larger, in future waves? That seems to be the easiest route to go, chalking up the first wave to trial and error.
Mine are due to arrive, today. No matter what, I'll be keeping the Lucha Bros. The rest may be for sale.
|
|
sbayunco
Mid-Carder
Joined on: Jul 18, 2020 9:48:00 GMT -5
Posts: 325
|
Post by sbayunco on Nov 12, 2020 12:47:06 GMT -5
After looking at all the photos, Dustin's width seems to be more out-of-scale than his height. That said, Moxley jumps out as a bigger case of scaling issues. MJF looks too big, as well. I didn't collect during the Jakks days, so, I'll ask those who were. Is Jeremy/WCT likely to make the Series 1 figures larger, in future waves? That seems to be the easiest route to go, chalking up the first wave to trial and error. Mine are due to arrive, today. No matter what, I'll be keeping the Lucha Bros. The rest may be for sale. MJF is the smallest of the bunch, at most the same size as Fenix.
|
|
lion2step91
Mid-Carder
Joined on: Mar 16, 2020 21:45:35 GMT -5
Posts: 102
|
Post by lion2step91 on Nov 12, 2020 12:49:12 GMT -5
Awesome thx u ... if you have one more in you Just Ambrose Cody Dustin together if not you’ve done more than enough thx u allot imgur.com/a/ZhFQxNeI won't argue that there is a scale issue with mattel but seeing cody Dustin and mox together I don't think its that bad. Cody is about 6'2 mox is 6'4 and dustin is around 6'6
|
|
|
Post by PJ on Nov 12, 2020 12:49:25 GMT -5
Is Dustin to tall? Sure. But I don’t know why people expect Jazwares to be in scale with Mattel. Would it be nice? Sure, but they have no obligation to match another companies scale or design.
|
|
|
Post by Deep Figure Value on Nov 12, 2020 12:59:05 GMT -5
Scale honestly doesn't bug me too much. It's still the nicest Moxley/Ambrose figure released to date.
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 12, 2020 14:33:44 GMT -5
I won't argue that there is a scale issue with mattel but seeing cody Dustin and mox together I don't think its that bad. Cody is about 6'2 mox is 6'4 and dustin is around 6'6 I think they did a real good job w Dustin and Ambrose from what I’m seeing in those pics Again need to see them in hand this weekend I think when you become so use to seeing one way for 10 years it may come off as jarring at first glance but try to step back and consider Dustin is closer to 6’4 Mox is 6’2 but they did use the online heights ( of 6’6 & 6’4) it’s basically the same difference in regards to each other Now Not in comparison to Mattel but as PJ said and I’ve sure I’ve mentioned it’s not apples to apples anyways and no one ever promised us it would be They look really really Look good together in scale within there own line again just judging from these pics However Personally upon receiving Unrivaled series 1 I thought well they line up w elites so it’s exceptable but same thing as elite line Jericho is too tall and then so are the rest of the elite outside of Cody But now seeing them add some variance to the height in series 2 it’s clearly Cody That they missed on in the line height wise that throws things off he should be in line w Moxley there very close in height if not exactly the same in real life the others would all appear to then fall in very naturally to there true life counterparts and in saying all that I’m sure some elites may line up just fine on a case by case comparisons with how these were produced anyways where others will be wonky but that’s not really there fault for one Undertaker should be a tad taller than Dustin and Kane should be taller than Taker and so on and so forth so it will be up to the individual if they are fine w that or more particular about such things as we all collect differently and that’s actually what’s kinda cool About the hobby just keep in mind 1. Mattel has many height issues themselves 2 AEW Unrivaled are there own thing No different than Black Series ,Marvel Legends, Gi Joe they just happen to also be Pro Wrestling And what’s not to love about getting more of those it’s a Great Time to be a Collector
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 12, 2020 14:40:58 GMT -5
Scale honestly doesn't bug me too much. It's still the nicest Moxley/Ambrose figure released to date.
|
|
The Coach
Superstar
Joined on: Dec 23, 2018 15:54:24 GMT -5
Posts: 721
|
Post by The Coach on Nov 12, 2020 17:13:11 GMT -5
Jakks was notorious for terrible scale. Did you all expect Padawer to fix it in 2 waves of a new company? Lol
|
|
Ace Gervase
Main Eventer
Joined on: Nov 11, 2002 16:09:33 GMT -5
Posts: 1,581
|
Post by Ace Gervase on Nov 12, 2020 20:23:41 GMT -5
Is Dustin to tall? Sure. But I don’t know why people expect Jazwares to be in scale with Mattel. Would it be nice? Sure, but they have no obligation to match another companies scale or design. People expect it because we were told they would be in scale with them
|
|
fuennza
Superstar
🇨🇱
Joined on: Jul 27, 2020 23:48:01 GMT -5
Posts: 935
|
Post by fuennza on Nov 12, 2020 20:32:55 GMT -5
Can anyone compare Moxley and Jericho series 1?
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 12, 2020 20:42:38 GMT -5
Is Dustin to tall? Sure. But I don’t know why people expect Jazwares to be in scale with Mattel. Would it be nice? Sure, but they have no obligation to match another companies scale or design. People expect it because we were told they would be in scale with them Did they though I mean yes we were told they would be 1/12 scale but many 1/12 scale lines differ in application Can we point to a specific interview where Jeremy clearly said they would be exact character to character No I really don’t think we can and again it’s not there obligation to follow Mattel’s lead in there perceived scale of there product which isn’t all that accurate all the time as it is
|
|
|
Post by ztj_wwf on Nov 12, 2020 20:42:53 GMT -5
Is Dustin to tall? Sure. But I don’t know why people expect Jazwares to be in scale with Mattel. Would it be nice? Sure, but they have no obligation to match another companies scale or design. They should be in scale with their own figures though...Cody and Dustin are going to look ridiculous next to each other.
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 12, 2020 20:47:52 GMT -5
Can anyone compare Moxley and Jericho series 1? Credit for Photo’s goes to sbayunco just reposting to make it easier to view Hope you don’t mind
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 12, 2020 20:48:53 GMT -5
Is Dustin to tall? Sure. But I don’t know why people expect Jazwares to be in scale with Mattel. Would it be nice? Sure, but they have no obligation to match another companies scale or design. They should be in scale with their own figures though...Cody and Dustin are going to look ridiculous next to each other. Are you sure they aren’t already ? and even if just one of these figs were off did Mattel nail everything in series 1,2,3,etc
|
|
Robz PippinRoad
Superstar
Joined on: May 3, 2020 11:52:42 GMT -5
Posts: 841
|
Post by Robz PippinRoad on Nov 12, 2020 20:50:42 GMT -5
|
|