stoningtonj
Main Eventer
THE Stonington J
Joined on: Mar 24, 2006 16:18:45 GMT -5
Posts: 1,494
|
Post by stoningtonj on Jul 28, 2013 12:03:38 GMT -5
Picked up AJ series 30 from the big K. Cool fig... Left arm wont swing forward or back much.... It's kinda lame. feels like the joint is stuck or something. Anyone have any issues with any figs like this? And if you fixed it, how? Thanks.
|
|
RollinsFan44
Main Eventer
12 UK Classifieds Refs.
Joined on: Feb 27, 2013 13:05:53 GMT -5
Posts: 4,160
|
Post by RollinsFan44 on Jul 28, 2013 12:05:16 GMT -5
You could try and return it and maybe swap it I guess.
|
|
RollinsFan44
Main Eventer
12 UK Classifieds Refs.
Joined on: Feb 27, 2013 13:05:53 GMT -5
Posts: 4,160
|
Post by RollinsFan44 on Jul 28, 2013 12:05:56 GMT -5
If you contact Mattel about it there pretty cool about it usually, and they sometimes give you a voucher to get another figure.
|
|
Deleted
Joined on: May 18, 2024 17:25:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 28, 2013 13:14:30 GMT -5
Try heating the joint. Boiling water or hairdryer.
|
|
|
|
Post by AlexWestCollects on Jul 28, 2013 13:18:00 GMT -5
Run the joint under hot water.
|
|
titanium1208
Mid-Carder
Joined on: Jul 21, 2013 6:54:19 GMT -5
Posts: 254 
|
Post by titanium1208 on Jul 28, 2013 13:25:28 GMT -5
I would probrably exchange it for another one
|
|
|
|
Post by Lorenzo Alcazar on Jul 28, 2013 13:27:49 GMT -5
Run the joint under hot water. This. Anytime I have an issue with a stiff joint or something is stuck on any of my figures, I just take it to the sink and run it under hot water for about a minute and the problem always corrects itself. |
|
Deleted
Joined on: May 18, 2024 17:25:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 28, 2013 20:12:44 GMT -5
I have the same issue with my Jack Swagger elite WM figure, except it's the torso belly articulation, he won't lean backwards, only forwards. I worry pushing too hard is gonna snap something, and this wasn't a cheap figure.. Will have to try the hot water thing
|
|
Deleted
Joined on: May 18, 2024 17:25:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 28, 2013 20:47:15 GMT -5
I have the same issue with my Jack Swagger elite WM figure, except it's the torso belly articulation, he won't lean backwards, only forwards. I worry pushing too hard is gonna snap something, and this wasn't a cheap figure.. Will have to try the hot water thing Fill up the sink with hot water and put it in it for a while, If it still dosen't work put it back in the water |
|
Deleted
Joined on: May 18, 2024 17:25:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 28, 2013 20:50:22 GMT -5
I have the same issue with my Jack Swagger elite WM figure, except it's the torso belly articulation, he won't lean backwards, only forwards. I worry pushing too hard is gonna snap something, and this wasn't a cheap figure.. Will have to try the hot water thing Fill up the sink with hot water and put it in it for a while, If it still dosen't work put it back in the water Doesn't water loosen the joints and get stuck in the figure though? Would a hair dryer be better? |
|
Deleted
Joined on: May 18, 2024 17:25:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 28, 2013 20:51:04 GMT -5
Fill up the sink with hot water and put it in it for a while, If it still dosen't work put it back in the water Doesn't water loosen the joints and get stuck in the figure though? Would a hair dryer be better? Water is better than hair dryer. Hair dryer can melt the figure if you keep it on for too long. |
|
Deleted
Joined on: May 18, 2024 17:25:06 GMT -5
Posts: 0
|
Post by Deleted on Jul 28, 2013 20:52:01 GMT -5
K, trying it out now, thanks!
|
|
|
|
Post by RybackV1 on Jul 28, 2013 21:48:09 GMT -5
Be happy you got a B30 AJ..I guess my areas done with that wave as I found B31 Rosa today.
|
|
stoningtonj
Main Eventer
THE Stonington J
Joined on: Mar 24, 2006 16:18:45 GMT -5
Posts: 1,494
|
Post by stoningtonj on Jul 28, 2013 23:42:08 GMT -5
Run the joint under hot water. Just did this...It worked! Thanks so much dude! You're awesome.  |
|
|
|
Post by AlexWestCollects on Jul 28, 2013 23:45:11 GMT -5
Run the joint under hot water. Just did this...It worked! Thanks so much dude! You're awesome. Glad to help bro. |
|
