TheXtremisT
Main Eventer
10 Year Member
This is the way
Joined on: May 3, 2008 8:03:15 GMT -5
Posts: 3,885
|
Post by TheXtremisT on May 29, 2009 9:57:04 GMT -5
I've been working on this for a couple of weeks, although i cut the board out ages ago Basically i had the sides all cut to 11 inches, drilled hole 1/2 inch from the corners and stuck 1/2 square dowels in they were cut to the right height, to elevate the ring off the ground holes were drilled in for the fish eye hooks, painted black then i made my own turnbuckle pads based on jakks' ones i ironed on the tna logos, and attached them with small black cord then put on sponge padding and grey mat the ring skirts were added with velcro, so i could remove them and add different ones as i pleased (made entirely by me) i modelled it after the 2006 era, as thats the time my figures reflect i just need to paint on red tnawrestling.com down the back of each turnbuckle, then i'm 100% done more photos will be up soon, plus a video showing the main stages           thanks for looking, let me know what u think |
|
|
|
Post by LtD73 on May 29, 2009 10:04:11 GMT -5
Thats really gd
I have a similar one made by Jpilko
|
|
|
|
Post by Lewscher on May 29, 2009 11:08:13 GMT -5
looks so cool i made one but it was a bit too big lol i might make a ring in perfect scale though ;D bit bigger than that but not too much -------------------------------------------------------------------- its a fair scale but a tad small tbh  |
|
Deleted
Joined on: May 18, 2024 10:56:50 GMT -5
Posts: 0
|
Post by Deleted on May 29, 2009 12:13:35 GMT -5
Amazing! You put a lot of time and effort into this, and it really shows.
|
|
|
|
Post by XHW on May 29, 2009 16:40:09 GMT -5
that is awesome, it looks good
|
|
hjejmnse1
Main Eventer
Bunny! 831st Top Poster
Joined on: Mar 15, 2009 22:47:53 GMT -5
Posts: 2,056
|
Post by hjejmnse1 on May 29, 2009 17:44:35 GMT -5
Amazing do you sell?
|
|
|
|
Post by spawnsyxx9 on May 29, 2009 17:52:18 GMT -5
Very awesome man.
|
|
KoB3
Superstar
Joined on: Mar 27, 2009 16:25:34 GMT -5
Posts: 777
|
Post by KoB3 on May 29, 2009 18:01:30 GMT -5
Thats a nice ring.I like the turnbuckles.
|
|
|
|
Post by figurefanatic316 on May 29, 2009 18:14:05 GMT -5
looks good, the original is horrendous!! way too small
|
|
intheshadows
Mid-Carder
9 refs & counting. Build N Brawl Forever!
Joined on: Aug 1, 2006 16:19:49 GMT -5
Posts: 236
|
Post by intheshadows on May 29, 2009 20:14:28 GMT -5
NICE! I really like the TNA 6 sided ring myself and ive wanted to build one in a smaller scale. Impressive man...very impressive.
This is one of the reasons i hope TNA continues to grow....that ring lol.
|
|
|
|
Post by Bret "The Hitman" Hart on May 29, 2009 23:01:52 GMT -5
that was awesome....10/10...you should do more ring, you're good
|
|
|
|
Post by michs on May 29, 2009 23:40:36 GMT -5
its an awesome ring the only thing is it to small the ring posts should be just below shoulder hieght but it still looks good
|
|
Bozwell634™
Main Eventer
Joined on: Apr 27, 2007 0:11:21 GMT -5
Posts: 4,652
|
Post by Bozwell634™ on May 30, 2009 4:10:04 GMT -5
That is some really great work. Even got the corner pads, all round great stuff.
|
|
TheXtremisT
Main Eventer
10 Year Member
This is the way
Joined on: May 3, 2008 8:03:15 GMT -5
Posts: 3,885
|
Post by TheXtremisT on May 30, 2009 5:58:46 GMT -5
Amazing! You put a lot of time and effort into this, and it really shows. yeah i am really pleased with it thanks thanks, but unfortunately i dont sell, it takes very long to make, and i dont have enough time that was awesome....10/10...you should do more ring, you're good thanks, i may do some in the future |
|
TheXtremisT
Main Eventer
10 Year Member
This is the way
Joined on: May 3, 2008 8:03:15 GMT -5
Posts: 3,885
|
Post by TheXtremisT on May 30, 2009 6:03:25 GMT -5
its an awesome ring the only thing is it to small the ring posts should be just below shoulder hieght but it still looks good yeah i know, the reason is i cut out a square piece of wood for a normal ring, then decided to make a six sided one, so i had to make the dimensions fit the square as that was all i had to make it but i am still pleased with it, i would like it to be larger but oh well yeah the turnbuckles are wierd - i cut them to perfection (ie the right height) but upon putting them on they seemed a tiny bit smaller than they should have i think taht when i put the layer of sponge and grey material it raised the mat relative to the posts, so they appear smaller i should have anticipated that |
|
TheXtremisT
Main Eventer
10 Year Member
This is the way
Joined on: May 3, 2008 8:03:15 GMT -5
Posts: 3,885
|
Post by TheXtremisT on May 30, 2009 6:04:50 GMT -5
That is some really great work. Even got the corner pads, all round great stuff. apprecitate it, thanks glad everyone liked it, cheers for your comments  |
|
|
|
Post by tnafan17: The Total Package on May 30, 2009 13:42:47 GMT -5
awesome ring man. love to see people make some tna stuff. keep up the good work
|
|
Deep Shadows
Main Eventer
MXW 6 is here! https://youtu.be/LiDlNuiKmjA
Joined on: Jul 7, 2006 2:39:30 GMT -5
Posts: 3,504
|
Post by Deep Shadows on May 31, 2009 19:51:11 GMT -5
Looks really good...nice and neat and everything.
I would've made it a bit bigger though...it's not in scale with the figures.
The aprons look really good too...really nice work.
Like you said, just the TNAwrestling.com down the turnbuckle posts and it'll be complete.
|
|
Squared²
Main Eventer
IT'S ME AUSTIN
Joined on: May 18, 2009 16:30:42 GMT -5
Posts: 3,150
|
Post by Squared² on May 31, 2009 19:53:05 GMT -5
looks so cool
|
|
|
|
Post by unionjack on May 31, 2009 19:56:38 GMT -5
that looks awesome man
great work there .
|
|
