|
|
Post by BoneCrunchingCustoms on Nov 13, 2012 19:34:29 GMT -5
Just picked this up today and his boots are backwards D: Is it fixable?   |
|
|
|
Post by marino13 on Nov 13, 2012 19:39:29 GMT -5
Wow that just sucks! Do you have another Taker? If so you could do a boot or head swap.
|
|
|
|
Post by Chewdeezy on Nov 13, 2012 19:43:14 GMT -5
Just heat it up with a blow dryer or dip it in hot water and you can pop off the feet and put them back on the correct way.
|
|
|
|
Post by LtD73 on Nov 13, 2012 19:45:52 GMT -5
You've got a head swap in your sig, but you don't know how to do a simple foot swap?
|
|
|
|
Post by East Coast on Nov 13, 2012 19:50:44 GMT -5
simple and foot swap should not be in the same sentence.
I find footswaps to be the most annoying swap of all. I literally spent 30 mins trying to get a heath slater boot back on one time
|
|
|
|
Post by marino13 on Nov 13, 2012 19:56:48 GMT -5
simple and foot swap should not be in the same sentence. I find footswaps to be the most annoying swap of all. I literally spent 30 mins trying to get a heath slater boot back on one time Yeah swapping just the foot can be a pain. Much better off swapping the whole boot. |
|
|
|
Post by BoneCrunchingCustoms on Nov 13, 2012 19:59:26 GMT -5
Chewdeezy's suggestion worked like a charm. And I was unaware the foot part of the boot could come off.
|
|
|
|
Post by AlexWestCollects on Nov 13, 2012 20:03:08 GMT -5
simple and foot swap should not be in the same sentence. I find footswaps to be the most annoying swap of all. I literally spent 30 mins trying to get a heath slater boot back on one time Really? They are pretty easy. I put the back part in first n it pops right in. |
|
|
|
Post by Cammi Oh on Nov 13, 2012 20:30:51 GMT -5
simple and foot swap should not be in the same sentence. I find footswaps to be the most annoying swap of all. I literally spent 30 mins trying to get a heath slater boot back on one time Really? They are pretty easy. I put the back part in first n it pops right in. QFT You have to go back part first. It makes it much easier. |
|
gps
Main Eventer
Scalpers S**K
Joined on: Oct 4, 2012 17:53:56 GMT -5
Posts: 1,171
|
Post by gps on Nov 13, 2012 22:26:35 GMT -5
I purchased an E9 MVP figure from TRU last year that had his boots jacked up like that. I just took it back & exchanged it. Easier, IMO.
|
|
|
|
Post by Bandalero on Nov 13, 2012 23:12:43 GMT -5
If you guys think boot swaps are tricky - try elbow swaps!! Those things piss me off like no other. Constantly have to re-heat the parts just to get that stupid peg inside the holes of the fore-arm
|
|
PrideFcF
Main Eventer
Joined on: May 7, 2008 13:26:21 GMT -5
Posts: 3,807
|
Post by PrideFcF on Nov 13, 2012 23:18:09 GMT -5
I'm surprised at people finding boot/elbow swaps to be hard. If you use enough heat (water or blow dryer) combined with a half-way decent set of tools, you're good to go. I use a small pair of needle nose vice grips from one of my old jobs to do all part reassembly involving pegs. As long as the stuff is well heated, the job is over in a matter of seconds.
I know of someone that actually uses their teeth to push the pegs back into the forearms/knees. That makes my teeth hurt just thinking about it.
|
|
Deleted
Joined on: Nov 16, 2024 12:18:22 GMT -5
Posts: 0
|
Post by Deleted on Nov 13, 2012 23:20:49 GMT -5
I'm surprised at people finding boot/elbow swaps to be hard. If you use enough heat (water or blow dryer) combined with a half-way decent set of tools, you're good to go. I use a small pair of needle nose vice grips from one of my old jobs to do all part reassembly involving pegs. As long as the stuff is well heated, the job is over in a matter of seconds. I know of someone that actually uses their teeth to push the pegs back into the forearms/knees. That makes my teeth hurt just thinking about it. Whoops that's not me...  |
|
|
|
Post by Bandalero on Nov 13, 2012 23:45:47 GMT -5
lol I use my teeth too
|
|
JuiceWinslow
Main Eventer
Flair Country
Joined on: Sept 9, 2012 17:32:08 GMT -5
Posts: 2,706
|
Post by JuiceWinslow on Nov 14, 2012 0:36:15 GMT -5
I also use my teeth.
|
|
|
|
Post by poindizzle on Nov 14, 2012 0:50:37 GMT -5
Never done anything other than arm swaps and headswaps. Those are easy enough. The construction of the Elite ankles look trickier than basics, though. Just curious, with the ankles, which part do you take out? The ring going up into the ankle or the part that goes down into the foot?
|
|
|
|
Post by Bandalero on Nov 14, 2012 0:54:49 GMT -5
part that goes down into the foot, easier to get apart than the ring in the ankle
|
|
|
|
Post by PJ on Nov 14, 2012 16:43:24 GMT -5
Just heat the foot then pop them off switch them around.
|
|
Deleted
Joined on: Nov 16, 2024 12:18:23 GMT -5
Posts: 0
|
Post by Deleted on Nov 14, 2012 16:45:25 GMT -5
simple and foot swap should not be in the same sentence. I find footswaps to be the most annoying swap of all. I literally spent 30 mins trying to get a heath slater boot back on one time i will second this. foot swaps suck badly. |
|
|
|
Post by Next Manufactured’s Sweater on Nov 14, 2012 18:02:47 GMT -5
My 20-0 Undertaker has a right leg that doesn't move. I can move it a bit, but it springs back to where it was and I feel like if I force it, it's gonna snap. I've had too many elites/Legends like this. Punk, Goldust, Kofi, Rick Rude, WM26 Swagger, to name a few.
|
|
