monroe
Mid-Carder
Joined on: Mar 1, 2018 14:59:57 GMT -5
Posts: 462
|
Post by monroe on Mar 28, 2024 13:34:19 GMT -5
Is there a jeans mold that fits the Duggan/Sheik torso? I’m planning on fixing up Terry Gordy when he comes out, and I’d like to have a version in jeans, cowboy boots, and Badstreet USA shirt. What about the most recent baf British Bulldog ?
|
|
|
Post by Triple S: POOR on Mar 28, 2024 15:31:32 GMT -5
Is there a jeans mold that fits the Duggan/Sheik torso? I’m planning on fixing up Terry Gordy when he comes out, and I’d like to have a version in jeans, cowboy boots, and Badstreet USA shirt. Only one I can think of would probably be the Hulk Hogan/Luke Harper legs… but those are too baggy, I’d think.
|
|
Thunder Chunky
Main Eventer
Joined on: Aug 1, 2010 21:57:30 GMT -5
Posts: 4,490
|
Post by Thunder Chunky on Mar 28, 2024 17:16:43 GMT -5
Is there a jeans mold that fits the Duggan/Sheik torso? I’m planning on fixing up Terry Gordy when he comes out, and I’d like to have a version in jeans, cowboy boots, and Badstreet USA shirt. I would try the crotch piece from Amazon 3 pack Brock. That's as close as I can think of.
|
|
|
Post by Triple S: POOR on Mar 28, 2024 18:32:50 GMT -5
Is there a jeans mold that fits the Duggan/Sheik torso? I’m planning on fixing up Terry Gordy when he comes out, and I’d like to have a version in jeans, cowboy boots, and Badstreet USA shirt. I would try the crotch piece from Amazon 3 pack Brock. That's as close as I can think of. Those entire legs might work perfectly.
|
|
Apocalypse
Mid-Carder
Joined on: Nov 17, 2021 19:40:02 GMT -5
Posts: 463
|
Post by Apocalypse on Mar 28, 2024 20:01:55 GMT -5
Is there a jeans mold that fits the Duggan/Sheik torso? I’m planning on fixing up Terry Gordy when he comes out, and I’d like to have a version in jeans, cowboy boots, and Badstreet USA shirt. Legends 2 sheik . You may need to add the shins from another leg and paint but it would definetly fit that torso
|
|
tenryufan
Jobber
Joined on: Feb 29, 2024 17:38:43 GMT -5
Posts: 8
|
Post by tenryufan on Mar 29, 2024 6:33:55 GMT -5
Anyone know compatible legs with the elite Samoa Joe? I’m wanting to give him some trunks to get more of an ROH/early TNA look, something similar to this, but in elite form; but I’m not sure who to go with that would fit, match skintone and keep him in scale. Dusty? Lesnar? Any help appreciated.
|
|
ataris816
Mid-Carder
Joined on: Jan 17, 2008 1:48:40 GMT -5
Posts: 134
|
Post by ataris816 on Mar 29, 2024 16:28:35 GMT -5
Anyone know compatible legs with the elite Samoa Joe? I’m wanting to give him some trunks to get more of an ROH/early TNA look, something similar to this, but in elite form; but I’m not sure who to go with that would fit, match skintone and keep him in scale. Dusty? Lesnar? Any help appreciated. Tensai
|
|
|
Post by The Madness on Mar 29, 2024 17:38:45 GMT -5
Is there a jeans mold that fits the Duggan/Sheik torso? I’m planning on fixing up Terry Gordy when he comes out, and I’d like to have a version in jeans, cowboy boots, and Badstreet USA shirt. I would try the crotch piece from Amazon 3 pack Brock. That's as close as I can think of. Perfect! I have one of those laying around. Thanks!
|
|
|
Post by cuppacoffeeyeaaah on Mar 30, 2024 8:33:50 GMT -5
WCW Vincent. BAF Virgil with the legs from BAF Luger.
|
|
tenryufan
Jobber
Joined on: Feb 29, 2024 17:38:43 GMT -5
Posts: 8
|
Post by tenryufan on Mar 30, 2024 18:35:00 GMT -5
Elite Kento Miyahara. Basically made to use up some spare parts and because I wanted a Kento figure. Full Miz figure, modded head, Del Rio lowers. Ref pic (guy on left, obviously lol). Mainly chose this attire because it was the least complex tights design I’ve seen him wear.
|
|
MonsoonMan
Main Eventer
BITW 24/7-365. even leap years.
Joined on: Jan 1, 2012 22:47:05 GMT -5
Posts: 2,196
Member is Online
|
Post by MonsoonMan on Mar 31, 2024 12:41:38 GMT -5
my L20 Triple H figure. i wanted them to release a Triple H in different trunks designs than this, so i took it upon myself to just do this figure up as it should have been 😤😤😤 swapped the small kneepads for 'legsleeve' style, added kneebrace and swapped the small elbow pads for the open style.
|
|
jjh1292
Mid-Carder
Joined on: May 28, 2021 18:50:27 GMT -5
Posts: 367
|
Post by jjh1292 on Mar 31, 2024 12:51:07 GMT -5
That looks great. I did the same to mine when I got it. I don’t get why they haven’t used the open face pads again.
|
|
penguin
Superstar
Joined on: Jan 26, 2003 16:46:02 GMT -5
Posts: 692
|
Post by penguin on Mar 31, 2024 20:31:27 GMT -5
What’s the easiest method for moving a knee brace from an Elite Stone Cold to the Ultimate one?
|
|
|
Post by The Assassin on Apr 1, 2024 6:09:34 GMT -5
Been working on this a few months, it's fully sculpted (with airbrushing) but I tried to make it look factory: Reference: Jon Cena @ WWE House Show, April 1, 2004 - YouTubeI'm considering adding the LOD shoulderpads for a more authentic look, what do you guys think? . . . (April Fools)
|
|
tommygee15
Superstar
Joined on: Jun 17, 2020 10:47:12 GMT -5
Posts: 776
|
Post by tommygee15 on Apr 3, 2024 13:27:18 GMT -5
Does anyone know if elite la knight is on ball joints ? Thanks
|
|
|
Post by shanieomaniac on Apr 3, 2024 22:24:24 GMT -5
OK I'm pretty sure this has been asked before but in my case it's a bit different.
Swapping old Elite boots onto a new basic. Specifically, an Elite 51 Sami's boots onto the new Sami basic.
I'm guessing the pegs don't fit right but, with modification, would you be able to get them to fit or is this a 'cut and glue' situation?
|
|
Papi Joker
Main Eventer
INTERNATIONAL COLLECTORS LIVES MATTER
Joined on: Feb 23, 2016 23:56:30 GMT -5
Posts: 1,520
|
Post by Papi Joker on Apr 3, 2024 23:11:39 GMT -5
OK I'm pretty sure this has been asked before but in my case it's a bit different. Swapping old Elite boots onto a new basic. Specifically, an Elite 51 Sami's boots onto the new Sami basic. I'm guessing the pegs don't fit right but, with modification, would you be able to get them to fit or is this a 'cut and glue' situation? when they first changed to 'no ankle pivot' the old basic/elite boots would pop in easy!! but lately they seem to have different pegs and I cannot keep them on tight, no point cutting and gluing defeats the purpose of extra articulation!
|
|
|
Post by shanieomaniac on Apr 3, 2024 23:58:52 GMT -5
OK I'm pretty sure this has been asked before but in my case it's a bit different. Swapping old Elite boots onto a new basic. Specifically, an Elite 51 Sami's boots onto the new Sami basic. I'm guessing the pegs don't fit right but, with modification, would you be able to get them to fit or is this a 'cut and glue' situation? when they first changed to 'no ankle pivot' the old basic/elite boots would pop in easy!! but lately they seem to have different pegs and I cannot keep them on tight, no point cutting and gluing defeats the purpose of extra articulation! I actually gave it a shot with an old pair of basic Sami boots. You're right, they don't want to stay on tight at all. I had to use tack to get them to stay in place.
|
|
|
Post by shanieomaniac on Apr 4, 2024 0:07:01 GMT -5
Wrestlemania 39 Sami Zayn Pre-Match (Updated)I don't remember if I showed my original fixup of this before but, now that I know what the UE is gonna look like, I'm making this a permanent custom. Body and Head: Basic 145 Sami Zayn (with paint work) Boots: Basic 50 Sami Zayn (with some tack added to make them stay, toe cuts altered, and laces painted white) Jacket (hoodie): Elite 107 Finn Balor As a general note: My phone camera mucks with the colors on things so the colors on this aren't actually true to life. IRL his beard is red and his hair is a slightly darker, browner shade of red.
|
|
|
Post by shanieomaniac on Apr 4, 2024 1:19:32 GMT -5
OK, I know I asked this before but I forgot to write it down and now I can't find the post.
I've got the idea of how to apply decals, but I forget -- what type of prep/set/finish do you use for wrestling figures? Working with CSCD here.
|
|