Deleted
Joined on: Apr 20, 2024 9:18:07 GMT -5
Posts: 0
|
Post by Deleted on Jul 27, 2015 17:25:44 GMT -5
So I was removing arms and I accidentally pulled off the hand. Is there anything I can do to get it on?
|
|
Deleted
Joined on: Apr 20, 2024 9:18:07 GMT -5
Posts: 0
|
Post by Deleted on Jul 27, 2015 17:26:36 GMT -5
So I was removing arms and I accidentally pulled off the hand. Is there anything I can do to get it on? Did the peg break off?
|
|
|
Post by Ben - #6 Munchie on Jul 27, 2015 17:27:41 GMT -5
Heat up the peg on the end of the arm by using either a hair dryer or hot water (most people prefer hair dryer). Once it's squishy/flexible push the peg on the hand back in and you're golden!
|
|
Deleted
Joined on: Apr 20, 2024 9:18:07 GMT -5
Posts: 0
|
Post by Deleted on Jul 27, 2015 17:29:23 GMT -5
Nope. There's absolutely nothing you can do. You've completely ruined the figure. Try hitting it with a blow dryer and pop it in. Don't use hot water. hot water. Blow dryer baby
|
|
Deleted
Joined on: Apr 20, 2024 9:18:07 GMT -5
Posts: 0
|
Post by Deleted on Jul 27, 2015 17:46:28 GMT -5
So I was removing arms and I accidentally pulled off the hand. Is there anything I can do to get it on? Did the peg break off? No, just the hand.
|
|
|
Post by A Flair for the Gold on Jul 27, 2015 17:54:12 GMT -5
i half expected this to be something about missing the toilet or soiling yourself, LOL
|
|
Deleted
Joined on: Apr 20, 2024 9:18:07 GMT -5
Posts: 0
|
Post by Deleted on Jul 27, 2015 17:54:51 GMT -5
Heat up the peg on the end of the arm by using either a hair dryer or hot water (most people prefer hair dryer). Once it's squishy/flexible push the peg on the hand back in and you're golden! OMG! Thank you so much!
|
|
|
Post by Ben - #6 Munchie on Jul 27, 2015 18:11:46 GMT -5
Heat up the peg on the end of the arm by using either a hair dryer or hot water (most people prefer hair dryer). Once it's squishy/flexible push the peg on the hand back in and you're golden! OMG! Thank you so much! No problem bud! Hope you get it all sorted!
|
|
Deleted
Joined on: Apr 20, 2024 9:18:07 GMT -5
Posts: 0
|
Post by Deleted on Jul 27, 2015 18:27:48 GMT -5
Remember to tell us if it works.
|
|
Deleted
Joined on: Apr 20, 2024 9:18:07 GMT -5
Posts: 0
|
Post by Deleted on Jul 27, 2015 18:59:07 GMT -5
Remember to tell us if it works. It did! It was an elite 20 Cody Rhodes and I wanted to swap the arms with the 32 ones, but I guess I just pulled down on the wrong part. But thanks everyone for helping!
|
|
customania
Main Eventer
HBK, Orton, Reigns, Jomo, Rollins, Triple H, Neville, Test, Rollins and Warrior are some of the best
Joined on: Jun 22, 2014 4:06:30 GMT -5
Posts: 3,022
|
Post by customania on Jul 28, 2015 13:54:51 GMT -5
If the peg is broke no. 3 pegs have broke before (not through customising) they were elite 5 Rey Mysterio, elite 14 Booker T and Basic 6 Kelly Kelly.
|
|
Figure kingdom
Main Eventer
Go peep @figurekingdom on IG for WWE action figure pics!
Joined on: Jul 9, 2011 16:09:32 GMT -5
Posts: 1,395
|
Post by Figure kingdom on Jul 28, 2015 14:41:00 GMT -5
The same thing happened to me with the Wrestlemania exlusive old school Undertaker. All I did was carefully take off the coat and the hand just came off. The blow dryer definitley helped a bunch!
|
|
|
Post by hbkbigdaddycool on Jul 28, 2015 15:47:03 GMT -5
You are lucky it didn't break!
The hands are always so tricky to take off, I just feel like the peg is gonna snap no matter how much heat I use on the arm area.
|
|
|
Post by JC Motors on Jul 28, 2015 18:00:17 GMT -5
I'm fortunate to never have this happen to me
|
|