|
|
Post by BHG738 on Jul 5, 2015 4:32:08 GMT -5
I'm looking at adding to my Mattels with some Jakks R3 or TTL Figures.
Which of the two works better?
The R3 figures seem to look too small.
Anyone got any comparison pictures?
I'm especially interested in Kurt Angle pics.
|
|
|
|
Post by Next Man’s Knowing Rock on Jul 5, 2015 4:37:58 GMT -5
|
|
|
|
Post by @.@ Hempsterdance @.@ on Jul 5, 2015 5:09:35 GMT -5
I dont know if this helps but heres a custom Kurt Angle with a Mattel body, Jakks r3 head and TTL singlet  |
|
LD8506
Main Eventer
30 Classified Ref's and counting!
Joined on: Apr 26, 2014 6:29:52 GMT -5
Posts: 1,201
|
Post by LD8506 on Jul 5, 2015 5:43:56 GMT -5
I dont know if this helps but heres a custom Kurt Angle with a Mattel body, Jakks r3 head and TTL singlet Not bad, not bad at all and looks like the skintone matches with Angle's head. Did you have to dremmel or modify the head for it to fit the Mattel body? Who's body did you use? I need a Benoit and Angle for my Ruthless Agression set up. Thanks |
|
|
|
Post by @.@ Hempsterdance @.@ on Jul 5, 2015 5:51:25 GMT -5
I dont know if this helps but heres a custom Kurt Angle with a Mattel body, Jakks r3 head and TTL singlet Not bad, not bad at all and looks like the skintone matches with Angle's head. Did you have to dremmel or modify the head for it to fit the Mattel body? Who's body did you use? I need a Benoit and Angle for my Ruthless Agression set up. Thanks I used the Legends Rick Martel body and the head fit perfectly. |
|
LD8506
Main Eventer
30 Classified Ref's and counting!
Joined on: Apr 26, 2014 6:29:52 GMT -5
Posts: 1,201
|
Post by LD8506 on Jul 5, 2015 5:58:00 GMT -5
Not bad, not bad at all and looks like the skintone matches with Angle's head. Did you have to dremmel or modify the head for it to fit the Mattel body? Who's body did you use? I need a Benoit and Angle for my Ruthless Agression set up. Thanks I used the Legends Rick Martel body and the head fit perfectly. Damn, that figure is kinda pricy to use. I'm thinking if any any other figure has the same skin tone as Kurt's head |
|
|
|
Post by @.@ Hempsterdance @.@ on Jul 5, 2015 6:44:45 GMT -5
I used the Legends Rick Martel body and the head fit perfectly. Damn, that figure is kinda pricy to use. I'm thinking if any any other figure has the same skin tone as Kurt's head Maybe a ttl figure. This was the only one i had that matched. |
|
shanoe
Mid-Carder
Joined on: Sept 9, 2013 8:54:46 GMT -5
Posts: 313 
|
Post by shanoe on Jul 5, 2015 6:54:35 GMT -5
I'd be curoius to see a comparison pics of a TTL nex to a Mattel figure
I'm planning a head swap too, using a ttl Edge
|
|
|
|
Post by PJ on Jul 5, 2015 7:07:48 GMT -5
|
|
Deleted
Joined on: Apr 18, 2024 10:00:18 GMT -5
Posts: 0
|
Post by Deleted on Jul 5, 2015 7:20:24 GMT -5
I used the Legends Rick Martel body and the head fit perfectly. Damn, that figure is kinda pricy to use. I'm thinking if any any other figure has the same skin tone as Kurt's head I have a similar looking angle custom but I used a Sandow basic body, the skin tone is spot on |
|
LD8506
Main Eventer
30 Classified Ref's and counting!
Joined on: Apr 26, 2014 6:29:52 GMT -5
Posts: 1,201
|
Post by LD8506 on Jul 5, 2015 8:16:55 GMT -5
Damn, that figure is kinda pricy to use. I'm thinking if any any other figure has the same skin tone as Kurt's head I have a similar looking angle custom but I used a Sandow basic body, the skin tone is spot on Thanks buddy. PJ you're the man! thanks |
|
|
|
Post by ZDB on Jul 5, 2015 8:59:23 GMT -5
 Used an R3 Austin head on the DM body The head is sized pretty good |
|
jbutts
Mid-Carder
Go follow bodyslamminent on IG !
Joined on: Jul 12, 2013 16:50:16 GMT -5
Posts: 377
|
Post by jbutts on Jul 5, 2015 9:32:17 GMT -5
I have a angle custom on my IG @bodyslamminfigs and did I mention I'm doing a giveaway? Haha cheap plug
|
|
