|
Post by mankind on Jun 2, 2015 16:47:37 GMT -5
I'd love to know what they're going to give Stephanie for an accessory
|
|
|
Post by LostHawk05 on Jun 2, 2015 16:47:43 GMT -5
Pre ordered the Outsiders. Will probably order Malenko and Seth later on today.
|
|
Deleted
Joined on: Apr 17, 2024 23:51:35 GMT -5
Posts: 0
|
Post by Deleted on Jun 2, 2015 16:55:10 GMT -5
|
|
gregrules420
POSSIBLE BAD TRADER
Joined on: Dec 29, 2014 9:17:09 GMT -5
Posts: 4,884
|
Post by gregrules420 on Jun 2, 2015 16:59:50 GMT -5
Pre-ordered Seth Dean Steph Steph will be my first female character purchase from Mattel. I know her figure will be spectacular without even seeing it. Thoroughly excited. After her, I may start collecting some divas I just grabbed a couple of the mUst get divas alica fox eve marie nat paige aj nikki bre steph if they do an updated naomi...with light up shoes....I would get her but it would be for The shoes not her
|
|
|
Post by The neferious brotha Hargrove on Jun 2, 2015 17:03:23 GMT -5
I'm still buy Seth Rollins poor skinny fella
|
|
|
Post by PJ on Jun 2, 2015 17:03:50 GMT -5
I love the people refusing to buy Rollins...until they find out he comes with the gold MitB briefcase. I'm probably not going to pre-order E37 yet. Everyone in that set is a wait and see. Seth and Malenko are the only two I want, but if those are the puny HBK arms I will be changing them with the Orton arms his B50 comes with. I made a custom a while back as a hold me over using Pillman's body from the neck to knees. But that torso is too big and e33 came out I wanted to use the last Rhodes figure with xPac legs, but never got around to buying another XPac when it was on the pegs. Now I feel it's to close to e37 release to redo my custom. Anyway I will still get the Rollins but if those aren't the old Orton arms on him than larger arms and Pillman's thighs would have been a much better choice. Part of me thinks they gave him the thin Bryan thighs to make his boots look thicker, because in real life his boot padding is pretty thick. I will have to wait a week or so before I preorder him to make sure I have funds for my Tito and 4H wants. lol
|
|
|
Post by Chewdeezy on Jun 2, 2015 17:04:15 GMT -5
That Seth better be an early prototype. Otherwise, what a major let down.
|
|
|
Post by Yambag Jones on Jun 2, 2015 17:20:36 GMT -5
I love the people refusing to buy Rollins...until they find out he comes with the gold MitB briefcase. I'm probably not going to pre-order E37 yet. Everyone in that set is a wait and see. Seth and Malenko are the only two I want, but if those are the puny HBK arms I will be changing them with the Orton arms his B50 comes with. I made a custom a while back as a hold me over using Pillman's body from the neck to knees. But that torso is too big and e33 came out I wanted to use the last Rhodes figure with xPac legs, but never got around to buying another XPac when it was on the pegs. Now I feel it's to close to e37 release to redo my custom. Anyway I will still get the Rollins but if those aren't the old Orton arms on him than larger arms and Pillman's thighs would have been a much better choice. Part of me thinks they gave him the thin Bryan thighs to make his boots look thicker, because in real life his boot padding is pretty thick. I will have to wait a week or so before I preorder him to make sure I have funds for my Tito and 4H wants. lol I made a custom using Elite Christian and only had to switch out the knees and below with Daniel Bryan's. I'll probably stick with that until I can get E37 below retail.
|
|
|
Post by PJ on Jun 2, 2015 17:27:41 GMT -5
Seth and Malenko are the only two I want, but if those are the puny HBK arms I will be changing them with the Orton arms his B50 comes with. I made a custom a while back as a hold me over using Pillman's body from the neck to knees. But that torso is too big and e33 came out I wanted to use the last Rhodes figure with xPac legs, but never got around to buying another XPac when it was on the pegs. Now I feel it's to close to e37 release to redo my custom. Anyway I will still get the Rollins but if those aren't the old Orton arms on him than larger arms and Pillman's thighs would have been a much better choice. Part of me thinks they gave him the thin Bryan thighs to make his boots look thicker, because in real life his boot padding is pretty thick. I will have to wait a week or so before I preorder him to make sure I have funds for my Tito and 4H wants. lol I made a custom using Elite Christian and only had to switch out the knees and below with Daniel Bryan's. I'll probably stick with that until I can get E37 below retail. I just hate that torso. It's my least favorite one they made after that Fandango monstrosity. I think the Orton/Cesaro/Rhodes torso is perfect. But I didn't want to split a torso for him so I just used the Pillman as a place holder.
|
|
|
Post by East Coast on Jun 2, 2015 17:33:52 GMT -5
I love the people refusing to buy Rollins...until they find out he comes with the gold MitB briefcase. I'm probably not going to pre-order E37 yet. Everyone in that set is a wait and see. Seth and Malenko are the only two I want, but if those are the puny HBK arms I will be changing them with the Orton arms his B50 comes with. I made a custom a while back as a hold me over using Pillman's body from the neck to knees. But that torso is too big and e33 came out I wanted to use the last Rhodes figure with xPac legs, but never got around to buying another XPac when it was on the pegs. Now I feel it's to close to e37 release to redo my custom. Anyway I will still get the Rollins but if those aren't the old Orton arms on him than larger arms and Pillman's thighs would have been a much better choice. Part of me thinks they gave him the thin Bryan thighs to make his boots look thicker, because in real life his boot padding is pretty thick. I will have to wait a week or so before I preorder him to make sure I have funds for my Tito and 4H wants. lol they look like the skinny daniel bryan legs w/ tights painted on them. But if u look at the 2nd pic from behind...u can see some wrinkles. So its probably the legs from Steamboat or e19 HBK or something. It just looks weird because no figures w/ those skinny tights has ever come w/ knee pads.
|
|
Daniel F'n Bryan
Main Eventer
Joined on: Jun 16, 2014 14:37:32 GMT -5
Posts: 3,348
|
Post by Daniel F'n Bryan on Jun 2, 2015 17:38:10 GMT -5
Anyone else love the fact brock is more expensive than rollins and dean...
|
|
|
Post by PJ on Jun 2, 2015 17:45:51 GMT -5
Seth and Malenko are the only two I want, but if those are the puny HBK arms I will be changing them with the Orton arms his B50 comes with. I made a custom a while back as a hold me over using Pillman's body from the neck to knees. But that torso is too big and e33 came out I wanted to use the last Rhodes figure with xPac legs, but never got around to buying another XPac when it was on the pegs. Now I feel it's to close to e37 release to redo my custom. Anyway I will still get the Rollins but if those aren't the old Orton arms on him than larger arms and Pillman's thighs would have been a much better choice. Part of me thinks they gave him the thin Bryan thighs to make his boots look thicker, because in real life his boot padding is pretty thick. I will have to wait a week or so before I preorder him to make sure I have funds for my Tito and 4H wants. lol they look like the skinny daniel bryan legs w/ tights painted on them. But if u look at the 2nd pic from behind...u can see some wrinkles. So its probably the legs from Steamboat or e19 HBK or something. It just looks weird because no figures w/ those skinny tights has ever come w/ knee pads. They probably are Steamboat's legs. I think e19 HBK legs would work for him. I actually almost used a pair on mine, before deciding I didn't want to ruin another e19 HBK. So I went with the Pillman body that has been a placeholder for Jericho, Triple H and a Benoit. lol
|
|
Daniel F'n Bryan
Main Eventer
Joined on: Jun 16, 2014 14:37:32 GMT -5
Posts: 3,348
|
Post by Daniel F'n Bryan on Jun 2, 2015 17:55:55 GMT -5
Guys, Rollins is really not that bad. Yes of course it could be better but this is what we will get for awhile. His legs should be thicker and should have chest hair but thats really it. His headsman is awesome in my opinion! And this is only a proto no need to jump right to conclusions because I'm sure that they will change a couple of thing before release.
|
|
|
Post by East Coast on Jun 2, 2015 18:06:24 GMT -5
they look like the skinny daniel bryan legs w/ tights painted on them. But if u look at the 2nd pic from behind...u can see some wrinkles. So its probably the legs from Steamboat or e19 HBK or something. It just looks weird because no figures w/ those skinny tights has ever come w/ knee pads. They probably are Steamboat's legs. I think e19 HBK legs would work for him. I actually almost used a pair on mine, before deciding I didn't want to ruin another e19 HBK. So I went with the Pillman body that has been a placeholder for Jericho, Triple H and a Benoit. lol still not a great figure.....but at least they actually used tights instead of painting on bare legs. I hate when they do that. Like e23 HHH, e27 Kofi and e30 Animal. just glancing at my collection, it looks like the same legs on e5 Chavo..or maybe e10 Yoshi Tatsu. Which are skinny...but not absurdly so. So maybe its just the picture. on a side note, while looking at my collection i noticed how crazy skinny e33 X-Pac's legs are. I couldn't even find anyone else with the same legs. Were they a new mold u think? It almost looks like the ones on this Rollins, but the wrinkles aren't in the same place so it can't be
|
|
|
Post by Roman Bellic on Jun 2, 2015 18:06:53 GMT -5
i actually love that Rollins
you got to remember that Mattel makes the figures, it cannot be the attire that he had for a couple months
remember: he had basic tights when he was with the Authority in the early-mid 2015
|
|
|
Post by TheChamp420 on Jun 2, 2015 18:24:50 GMT -5
This is my place holder, pillman body, b50 kickers. Think the torso is a bit wide up top, but it will hold me over...
|
|
|
Post by Mr. #1derful® on Jun 2, 2015 18:36:31 GMT -5
Pillman's torso looks much better than what the proto shows.
|
|
Deleted
Joined on: Apr 17, 2024 23:51:35 GMT -5
Posts: 0
|
Post by Deleted on Jun 2, 2015 18:49:59 GMT -5
I'm happy to give Rollins bigger arms, change the headscan and give him black knee pads, but please MattelDesignTeam give him bigger legs and Morrisons belt buckle, we didn't get a updated elite for his ENTIRE run with MITB, and we only end up getting it now, how could you make it like this with all that time? Please fix it up Mattel! You will get my money!
|
|
|
Post by perfectlyrude on Jun 2, 2015 19:00:08 GMT -5
This is my place holder, pillman body, b50 kickers. Think the torso is a bit wide up top, but it will hold me over... Pillman looks on point for Rollins or Dolph E24
|
|
|
Post by East Coast on Jun 2, 2015 19:03:53 GMT -5
Pillman's torso looks much better than what the proto shows. i think the torso is one of the better things about this Rollins. I was afraid they would just use the same one they had on the previous Rollins elites. Pillman was 230.....Macho Man was 245 and DDP was 250. Rollins only weighs 205lbs
|
|