|
Post by BoneCrunchingCustoms on Feb 10, 2015 22:34:21 GMT -5
I hated the jet black hair on E23 Taker, so I repainted it. I think it turned out ok. Looks better than the black imo anyway.
|
|
|
Post by "The Opportunist" Eric Flair on Feb 11, 2015 0:12:35 GMT -5
My first submission to my favorite thread on this board! Hope u guys like it. DM Hulk head Legends Sheik torso Triple H Legs Hacksaw trunks and boots Jakks belt and headband
|
|
|
Post by cmiller79 on Feb 11, 2015 1:55:00 GMT -5
Those warrior customs up there are awesome
|
|
Deleted
Joined on: Jun 2, 2024 6:32:07 GMT -5
Posts: 0
|
Post by Deleted on Feb 11, 2015 6:52:34 GMT -5
I hated the jet black hair on E23 Taker, so I repainted it. I think it turned out ok. Looks better than the black imo anyway. If you do a black wash over it now, it will be perfect. Credit: WWE and google search for image.
|
|
|
Post by BoneCrunchingCustoms on Feb 11, 2015 10:06:07 GMT -5
I hated the jet black hair on E23 Taker, so I repainted it. I think it turned out ok. Looks better than the black imo anyway. If you do a black wash over it now, it will be perfect. Credit: WWE and google search for image. You are correct, sir! But how do I do a "wash?" I am new to the painting scene.
|
|
Deleted
Joined on: Jun 2, 2024 6:32:07 GMT -5
Posts: 0
|
Post by Deleted on Feb 11, 2015 10:11:27 GMT -5
|
|
|
Post by PJ on Feb 11, 2015 10:13:45 GMT -5
If you do a black wash over it now, it will be perfect. Credit: WWE and google search for image. You are correct, sir! But how do I do a "wash?" I am new to the painting scene. Put a lot of water on the brush and paint the hair with just water. Then put a small dab of paint in the tip of the brush and reset the tip with water then paint the wet head. The paint will run into the groves of head were the water ran.
|
|
|
Post by BoneCrunchingCustoms on Feb 11, 2015 10:22:57 GMT -5
Thanks guys I shall attempt it! My first submission to my favorite thread on this board! Hope u guys like it. DM Hulk head Legends Sheik torso Triple H Legs Hacksaw trunks and boots Jakks belt and headband Also I love this Hogan!!
|
|
|
Post by "The Opportunist" Eric Flair on Feb 11, 2015 11:05:54 GMT -5
Thank u! Once I got the parts, Hogan was super easy!
|
|
|
Post by Planktung on Feb 11, 2015 11:58:26 GMT -5
Quick question for anyone that could answer. What kind of kickpads does the RSC Exclusive Edge have? The older style with the top portion of the kickpad attached to the lower leg, or the newer style where it's just one piece?
|
|
|
Post by tarver89 on Feb 11, 2015 12:00:46 GMT -5
Quick question for anyone that could answer. What kind of kickpads does the RSC Exclusive Edge have? The older style with the top portion of the kickpad attached to the lower leg, or the newer style where it's just one piece? The old ones.
|
|
|
Post by Planktung on Feb 11, 2015 12:07:54 GMT -5
Quick question for anyone that could answer. What kind of kickpads does the RSC Exclusive Edge have? The older style with the top portion of the kickpad attached to the lower leg, or the newer style where it's just one piece? The old ones. Damn. Thank you.
|
|
|
Post by tarver89 on Feb 11, 2015 12:15:28 GMT -5
No problem at all. WMXXX HBK too has the same old mold. I honestly prefer it, i don't like the new CM Punk / Daniel Bryan kickpads - calves mold.
|
|
|
Post by Planktung on Feb 11, 2015 12:45:41 GMT -5
No problem at all. WMXXX HBK too has the same old mold. I honestly prefer it, i don't like the new CM Punk / Daniel Bryan kickpads - calves mold. I'm just starting to get back into the figure game after a little over a year, so I didn't know about Michaels having the older mold. Interesting, though. I only prefer the newer style because I always found removing and adding knee pads to be a pain on the older kickpads.
|
|
|
Post by The Champ is Here! on Feb 11, 2015 14:16:25 GMT -5
Would a hacksaw head work for Necro butcher?
|
|
|
Post by knupmc on Feb 11, 2015 14:41:24 GMT -5
Anyone have any idea who I can make out of tru exclusive wm27 stone cold in jeans? I already have dm4 stone cold and I prefer the lighter jeans for stone cold. So anyone have an idea? I prefer to make someone who Mattel won't be making anytime in the near future (aka Ambrose, apa, etc.) and no one in the Indy's Any suggestions appreicated -Thanks I'd go with DDP in jeans with taped ribs. All of the parts exist that Mattel would most likely use. I would definitely do that. But unfortunately I don't have ddp and have been searching for him endlessly Great suggestion though
|
|
|
Post by The Madness on Feb 11, 2015 15:16:22 GMT -5
Would a hacksaw head work for Necro butcher? The best Necro I've ever seen used a modded Terry Funk. Looked almost like a factory job.
|
|
|
Post by The Champ is Here! on Feb 11, 2015 15:40:44 GMT -5
Would a hacksaw head work for Necro butcher? The best Necro I've ever seen used a modded Terry Funk. Looked almost like a factory job. Ive got that head...do you know who made it?
|
|
|
Post by BoneCrunchingCustoms on Feb 11, 2015 15:46:47 GMT -5
Finished my first attempt at a "wash" Turned out quite well, thank you to those who helped with the suggestion and the instructions
|
|
Deleted
Joined on: Jun 2, 2024 6:32:07 GMT -5
Posts: 0
|
Post by Deleted on Feb 11, 2015 15:50:50 GMT -5
Amazing, that looks great dude! great job!
|
|