|
Post by Joe/Smurf on Jul 24, 2014 17:02:46 GMT -5
Has anyone ever tried to swap a Jakks Paul Bearer head onto a Mattel "suited" body? I'm just not loving the Mattel BAF head and I was wondering if the Jakks head could be a solution. It'll be big, and it probably won't have a neck. That said the Bearer head kinda has the turkey neck thing going so it'd probably look fine. I've got Brent Musberger's head from the Rocky line on a suited Mattel body and it has those problems.
|
|
Ryan81398
Main Eventer
This is my life now.
Joined on: Jan 17, 2013 21:15:57 GMT -5
Posts: 1,834
|
Post by Ryan81398 on Jul 24, 2014 18:55:17 GMT -5
Does anyone know where I could find the 2010-ish front and back trunk and boot designs for Chris Jericho? I would like to make a custom Jericho, but I'm horrible at making logos.
Thank you.
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 24, 2014 19:43:04 GMT -5
Does anyone know where I could find the 2010-ish front and back trunk and boot designs for Chris Jericho? I would like to make a custom Jericho, but I'm horrible at making logos. Thank you. The customs support page? Skunk runs a logo request page there.
|
|
Ryan81398
Main Eventer
This is my life now.
Joined on: Jan 17, 2013 21:15:57 GMT -5
Posts: 1,834
|
Post by Ryan81398 on Jul 24, 2014 19:55:12 GMT -5
Does anyone know where I could find the 2010-ish front and back trunk and boot designs for Chris Jericho? I would like to make a custom Jericho, but I'm horrible at making logos. Thank you. The customs support page? Skunk runs a logo request page there. The only one I found hasn't been updated since February of last year...
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 24, 2014 19:56:16 GMT -5
The customs support page? Skunk runs a logo request page there. The only one I found hasn't been updated since February of last year... He posted a ton. And still posts regularly. /looked into and couldn't find them. Best of luck.
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 24, 2014 20:00:02 GMT -5
Sabu 4th one I've made I believe. Tried giving him the pointing finger but it didn't work out. Jamie Noble Had the parts and I'm using him for my pic fed so I figured why not
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 24, 2014 20:02:40 GMT -5
Looks decent, but that Torso is HUGE.
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 24, 2014 20:05:30 GMT -5
Looks decent, but that Torso is HUGE. I think Sabu's fine but yeah Noble looks like he's on roids
|
|
|
Post by "Original Broski" jonjon535353 on Jul 24, 2014 23:48:06 GMT -5
For some reason it isn't letting me add anything to the quote. Anyways, Drew's new head would work great for Nick. As for Matt, I still gotta figure out one to use for him. I'm thinking about using an old Jakks Jesse head since the facial expression is so goofy, and the Bucks have been goofy as hell since joining the Bullet Club. I can deal with the slight oversized head. Drew head would work for Matt(he has black hair) just need to paint the side burns. Nick(he has dirty blonde hair) so a HBK with a pony tail would work the best IMO.
|
|
shawnscga
Superstar
Joined on: Dec 21, 2012 6:01:14 GMT -5
Posts: 615
|
Post by shawnscga on Jul 25, 2014 2:52:59 GMT -5
Jamie Nobel seem pretty large
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 25, 2014 2:54:11 GMT -5
Jamie Nobel seem pretty large This is the alt universe version of him when he took roids
|
|
|
Post by S on Jul 25, 2014 7:06:58 GMT -5
Hey guys, just a quick question... I've just brought some super sculpey to do some customs, but it's an oven bake product.
Just wondering what you guys do to harden the stuff? Surely oven baking a plastic figure would either melt it or in the least, warp it...
|
|
Deep Shadows
Main Eventer
MXW 6 is here! https://youtu.be/LiDlNuiKmjA
Joined on: Jul 7, 2006 2:39:30 GMT -5
Posts: 3,504
|
Post by Deep Shadows on Jul 25, 2014 11:54:14 GMT -5
Hey guys, just a quick question... I've just brought some super sculpey to do some customs, but it's an oven bake product. Just wondering what you guys do to harden the stuff? Surely oven baking a plastic figure would either melt it or in the least, warp it... The best thing to use is apoxie... it's almost the same consistency as Sculpey, however it'll dry overnight. Then all you have to do is sand it smooth and paint it.
|
|
|
Post by S on Jul 25, 2014 12:54:21 GMT -5
Hey guys, just a quick question... I've just brought some super sculpey to do some customs, but it's an oven bake product. Just wondering what you guys do to harden the stuff? Surely oven baking a plastic figure would either melt it or in the least, warp it... The best thing to use is apoxie... it's almost the same consistency as Sculpey, however it'll dry overnight. Then all you have to do is sand it smooth and paint it. Hmm, I haven't heard about apoxie... But I've seen alot of people use sculpey... I've heard that you can boil it, but dunno if that's the case. If anyone who used sculpey for a custom can point me in the right direction? Otherwise, il use this apoxie stuff next time
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 25, 2014 13:02:25 GMT -5
The best thing to use is apoxie... it's almost the same consistency as Sculpey, however it'll dry overnight. Then all you have to do is sand it smooth and paint it. Hmm, I haven't heard about apoxie... But I've seen alot of people use sculpey... I've heard that you can boil it, but dunno if that's the case. If anyone who used sculpey for a custom can point me in the right direction? Otherwise, il use this apoxie stuff next time www.avesstudio.com/apoxie/super-white-apoxieI've always heard of people using Apoxie to customize and Sculpy to create from scratch.
|
|
Fave
Main Eventer
Who survived and what was left of them?
Joined on: Jul 20, 2010 20:06:52 GMT -5
Posts: 3,607
|
Post by Fave on Jul 25, 2014 14:02:02 GMT -5
The best thing to use is apoxie... it's almost the same consistency as Sculpey, however it'll dry overnight. Then all you have to do is sand it smooth and paint it. Hmm, I haven't heard about apoxie... But I've seen alot of people use sculpey... I've heard that you can boil it, but dunno if that's the case. If anyone who used sculpey for a custom can point me in the right direction? Otherwise, il use this apoxie stuff next time You can boil it that's what I did for a few of my figures. I think a hair dryer on the highest heat setting might work as well but definitely try the water.
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 25, 2014 14:26:44 GMT -5
Picked up two Swaggers... Thoughts on a Rhyno custom? Too tall? Too thin? Too small?
|
|
hollywoodryan
Main Eventer
nWo 4-Life
Joined on: Feb 15, 2004 19:10:15 GMT -5
Posts: 2,010
|
Post by hollywoodryan on Jul 25, 2014 15:19:12 GMT -5
Picked up two Swaggers... Thoughts on a Rhyno custom? Too tall? Too thin? Too small? Check out theoneandonly1979's Rhino on page 792 for an idea on parts
|
|
Deleted
Joined on: May 4, 2024 11:25:48 GMT -5
Posts: 0
|
Post by Deleted on Jul 25, 2014 15:51:43 GMT -5
|
|
|
Post by rustyy on Jul 25, 2014 16:03:49 GMT -5
E32 mysterio boots for billy gunn work?
|
|