|
Post by rustyy on Apr 27, 2014 13:36:55 GMT -5
Which figure has the pointed fingers that would work for Daniel Bryan? It's Jakks
|
|
|
Post by Ben - #6 Munchie on Apr 27, 2014 13:42:10 GMT -5
Which figure has the pointed fingers that would work for Daniel Bryan? It's Jakks R3 Scott Hall does
|
|
|
Post by Joe/Smurf on Apr 27, 2014 13:54:23 GMT -5
Which figure has the pointed fingers that would work for Daniel Bryan? It's Jakks R3 Scott Hall does R -3 anyone after the first series...
|
|
chargrove
Superstar
Joined on: Nov 4, 2011 1:42:54 GMT -5
Posts: 957
|
Post by chargrove on Apr 27, 2014 14:17:51 GMT -5
GDM, ing awesome Ryback, I always wanted to do this with an E25 Bruno with some Brock calves, but after seeing all of your previous Ryback figs, I knew it was only a matter of time until you knocked that one out of the park! Also, does anyone here have an extra RA Tajiri head for sale? Last thing! 3 of my ECW Elite customs for sale on eBay ending in the next two days! check em out!
|
|
|
Post by wwextreme25 on Apr 27, 2014 15:30:07 GMT -5
Few queried regarding customs. I've made quite a few, but whenever i make one that requires painting the legs, (yes i take them all apart) putting it all back together again just chips away the paint due to the knee movements etc.
Was wondering, 1). if anyon has this problem and 2). whats the best way to go around it? (painting the whole legs of figures without it chipping)
thanks in advance.
|
|
|
Post by Ben - #6 Munchie on Apr 27, 2014 15:53:39 GMT -5
Few queried regarding customs. I've made quite a few, but whenever i make one that requires painting the legs, (yes i take them all apart) putting it all back together again just chips away the paint due to the knee movements etc. Was wondering, 1). if anyon has this problem and 2). whats the best way to go around it? (painting the whole legs of figures without it chipping) thanks in advance. Sand down the circular joint on both sides of the knee a little bit. This will leave a small gap between the knee joining the thigh and calf, so when the joint moves the paint doesn't rub against the other joints and chip.
|
|
|
Post by Joe/Smurf on Apr 27, 2014 16:14:36 GMT -5
Few queried regarding customs. I've made quite a few, but whenever i make one that requires painting the legs, (yes i take them all apart) putting it all back together again just chips away the paint due to the knee movements etc. Was wondering, 1). if anyon has this problem and 2). whats the best way to go around it? (painting the whole legs of figures without it chipping) thanks in advance. Sand down the circular joint on both sides of the knee a little bit. This will leave a small gap between the knee joining the thigh and calf, so when the joint moves the paint doesn't rub against the other joints and chip. This. Also, sealing it with a brush-on super glue does wonders.
|
|
Jamie
Main Eventer
Joined on: Sept 14, 2013 15:54:23 GMT -5
Posts: 3,380
|
Post by Jamie on Apr 27, 2014 16:38:20 GMT -5
Kurt Angle Mattel Basic Custom: B28 Damien Sandow body, E5 Swagger singlet, The Miz Basic Blue Kneepads and a Jakks BO2006 head! Custom Sandman RA Jakks shirt for an order:
|
|
|
Post by wwextreme25 on Apr 27, 2014 18:03:55 GMT -5
Sand down the circular joint on both sides of the knee a little bit. This will leave a small gap between the knee joining the thigh and calf, so when the joint moves the paint doesn't rub against the other joints and chip. This. Also, sealing it with a brush-on super glue does wonders. awesome idea cheers. Also, i add sealer on it, just doesnt seem to actually, "seal" but the sand paper idea seems a great idea so i'll give that a go cheers ben.
|
|
DIESEL
Main Eventer
(╯°□°)╯︵ ┻━┻
Joined on: Jul 11, 2013 12:01:08 GMT -5
Posts: 2,372
|
Post by DIESEL on Apr 27, 2014 19:57:43 GMT -5
Jamie Awesome stuff dude!
|
|
Deleted
Joined on: May 20, 2024 22:42:16 GMT -5
Posts: 0
|
Post by Deleted on Apr 27, 2014 21:10:32 GMT -5
That ryback looks great. It looks right. Why did Mattel make him so small? Must have been so they can use the torso for warrior etc as well So he'd be a better swimmer?
|
|
Deleted
Joined on: May 20, 2024 22:42:16 GMT -5
Posts: 0
|
Post by Deleted on Apr 27, 2014 23:50:27 GMT -5
Kurt Angle Mattel Basic Custom: B28 Damien Sandow body, E5 Swagger singlet, The Miz Basic Blue Kneepads and a Jakks BO2006 head! Custom Sandman RA Jakks shirt for an order: DAMMIT! I was thinking of using that singlet for angle, but you beat me to it. Anyways, great job!
|
|
TheToySpot84
Superstar
Find me on Instagram @TheToySpot84
Joined on: Aug 6, 2008 0:50:16 GMT -5
Posts: 551
|
Post by TheToySpot84 on Apr 28, 2014 0:33:47 GMT -5
|
|
Deleted
Joined on: May 20, 2024 22:42:16 GMT -5
Posts: 0
|
Post by Deleted on Apr 28, 2014 1:01:21 GMT -5
DAMMIT! I was thinking of using that singlet for angle, but you beat me to it. Anyways, great job! He's not the first person to use that singlet for Angle, I've seen it done many times before. Finally jumped into the decal game. These are my first attempt so they're not perfect. Decided that SS98 Triple was my first choice. That looks awesome, the purple paint looks really smooth and the decal fits in really well with the paint, nicely done.
|
|
|
Post by rustyy on Apr 28, 2014 1:26:46 GMT -5
Do you have to mod r-3 hands to fit mattel?
|
|
Jamie
Main Eventer
Joined on: Sept 14, 2013 15:54:23 GMT -5
Posts: 3,380
|
Post by Jamie on Apr 28, 2014 1:53:02 GMT -5
Thanks guys!
|
|
kuleo16
Mid-Carder
Joined on: Feb 11, 2014 17:31:17 GMT -5
Posts: 204
|
Post by kuleo16 on Apr 28, 2014 2:59:41 GMT -5
Do you have to mod r-3 hands to fit mattel? yah its a bit smaller around the wrist. I did a mod on it for a hogan custom i made. Molded on some wristband around it.
|
|
|
Post by Slim on Apr 28, 2014 5:26:13 GMT -5
|
|
Deleted
Joined on: May 20, 2024 22:42:16 GMT -5
Posts: 0
|
Post by Deleted on Apr 28, 2014 8:36:17 GMT -5
That HHH!!! Great Work
|
|
nefud
Mid-Carder
Joined on: Mar 5, 2013 19:46:19 GMT -5
Posts: 104
|
Post by nefud on Apr 28, 2014 12:41:31 GMT -5
How should I go about removing tattoos from an elite R-Truth? I have tried acetone in the past, but it leaves the plastic with a nasty white film and.or a glossy look.
|
|