wwe raw hd stage

[timmay]

Credit to chokeslamcena and kaneisdaman for printouts of led lights and titantron. i used my own minitron printouts that can be found at wfigs.proboards48.com/index.cgi?board=printouts&action=display&thread=110033

This is my first hd stage that i made so any constructive criticism is welcomed to help me improve

[chokeslamcena]

Fantastic work. Absolutely fantastic work.

Although, seen as you just made it, you should probably scrap the printouts on the left and look for something similar to the new graphics they have (the city landscape kinda thing).


Brilliant work though. One of the best i've seen.

[timmay]

B.T.W even my new kitten likes it...

[timmay]

Dec 14, 2008 0:20:42 GMT -5 chokeslamcena said:

Fantastic work. Absolutely fantastic work.

Although, seen as you just made it, you should probably scrap the printouts on the left and look for something similar to the new graphics they have (the city landscape kinda thing).


Brilliant work though. One of the best i've seen.

Thanks chokeslamcena. I found some printouts for the citylandscacpe thing but i couldn't get it big enough. And i think your printout was actually pretty good even if it was just ripped off a google image or something

[chokeslamcena]

Dec 14, 2008 1:16:53 GMT -5 @timmay said:

Dec 14, 2008 0:20:42 GMT -5 chokeslamcena said:

Fantastic work. Absolutely fantastic work.

Although, seen as you just made it, you should probably scrap the printouts on the left and look for something similar to the new graphics they have (the city landscape kinda thing).


Brilliant work though. One of the best i've seen.

Thanks chokeslamcena. I found some printouts for the citylandscacpe thing but i couldn't get it big enough. And i think your printout was actually pretty good even if it was just ripped off a google image or something

Its actually just a screen print i took. I have the RAW graphics, and i just paused it, screen printed it and flipped it horizontally.




Anyway,


I really do like your stage. The first i've seen here with the actual printouts around the main screen. its very good.


Are you going to make the cylinder or the new lighting structure they have on the left of the stage? (both would be tough to make).

[● kaneisdaman ●]

Pretty cool stuff you did. Whilst its not highly accurate in terms of the designs, its not too bad at all. The sizing is BRILLIANT! Kudos.

[timmay]

Dec 14, 2008 1:21:50 GMT -5 chokeslamcena said:

Dec 14, 2008 1:16:53 GMT -5 @timmay said:

Thanks chokeslamcena. I found some printouts for the citylandscacpe thing but i couldn't get it big enough. And i think your printout was actually pretty good even if it was just ripped off a google image or something

Its actually just a screen print i took. I have the RAW graphics, and i just paused it, screen printed it and flipped it horizontally.




Anyway,


I really do like your stage. The first i've seen here with the actual printouts around the main screen. its very good.


Are you going to make the cylinder or the new lighting structure they have on the left of the stage? (both would be tough to make).

i can make it but i just need referance pics and printouts.
But i thought they got rid of the cylender?

[timmay]

Dec 14, 2008 1:29:53 GMT -5 ● kaneisdaman ● said:

Pretty cool stuff you did. Whilst its not highly accurate in terms of the designs, its not too bad at all. The sizing is BRILLIANT! Kudos.

Thanks ;D

I know the desings are not all acurate but i can't seem to find any good grahics for the RAW hd stage. only the titantron

[chokeslamcena]

Yeah they scrapped the cylinder. But the graphics you have on the "wall" of the stage belong to the stage with the cylinder.

The new "wall" graphics of the city dont have a cylinder, they have the lighting structure beside he stage.


So pretty much, its like two different stages:

Sparks and Cylinder

City and Structure


But (so far) your stage is based on the original RAW stage, so i wasn't sure if you were gonna make the cylinder to go with it or not. Or if you're just going to leave it as it is.


You should consider printing a raw logo out and putting it along the top of the stage (like they use in real life that hangs over the stage and plays graphics).

But your stage is pretty excellent. And your cat does look funny on it. Everyone's a winner



*edit*

I also like the way the stage itself is wider than the base of the stage. I don't know why, but i think it looks pretty cool the way it hangs over the edge. Im not sure if its like that in real life or not (i think it is on the right hand side in the SVR Game, but im not fully sure). Either way, it loosk good to me.

[timmay]

Dec 14, 2008 4:30:05 GMT -5 chokeslamcena said:

Yeah they scrapped the cylinder. But the graphics you have on the "wall" of the stage belong to the stage with the cylinder.

The new "wall" graphics of the city dont have a cylinder, they have the lighting structure beside he stage.


So pretty much, its like two different stages:

Sparks and Cylinder

City and Structure


But (so far) your stage is based on the original RAW stage, so i wasn't sure if you were gonna make the cylinder to go with it or not. Or if you're just going to leave it as it is.


You should consider printing a raw logo out and putting it along the top of the stage (like they use in real life that hangs over the stage and plays graphics).

But your stage is pretty excellent. And your cat does look funny on it. Everyone's a winner



*edit*

I also like the way the stage itself is wider than the base of the stage. I don't know why, but i think it looks pretty cool the way it hangs over the edge. Im not sure if its like that in real life or not (i think it is on the right hand side in the SVR Game, but im not fully sure). Either way, it loosk good to me.

Thanks but i have to see if the "wall" city landscape will be big enough to fit on my stage. If it is then i will get to work on the lighting strusture and updating my stage.

[timmay]

Im no regal 101 but i'll try to base it on the current one. But this is my first one and i have another sheet of cardboard to make the other one. Just so no one gets the wrong idea the cardboard is like 50 cm by 50 cm. I'll test all the wall graphics and stuff and try to make the lighting structure.
If any one can give me some referance pics of the left hand side of the stage it will be much easier than watching and pausing raw to get a good veiw of the stage

[● kaneisdaman ●]

Chokeslamcena is exactly on. I want to have a go at making one of these soon so ive been observing it closely, they have these curved structures in place of the cylinder but they are really difficult to capture.

Also the set does hang off the stage in real life.

[Wrigley15]

You should add the red lights on the front base of the stage where you have the old grey ones. The raw stage has those along with the other hd stages. Looks awesome though. YOU did a great job. All you need now is the big overhead tron but its really not neccesary.

[Jaz]

great work i would love to make one but the printouts for raw hd are pixalated hopefully kaneisdaman makes some soon hint hint

[lucasjmazzle]

is that a custom jeff hardy???

[timmay]

Dec 14, 2008 20:44:27 GMT -5 @lucasjmazzle said:

is that a custom jeff hardy???

no it came with the bret heart and jeff hardy pack.
look in the exclusives part of wrestlingfigures .com